Chipped 320 ECU in a 325?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
Brian28
E30 Zone Squatter
E30 Zone Squatter
Posts: 1596
Joined: Sat Jun 11, 2005 11:00 pm
Location: Bournemouth

Post Tue Dec 06, 2011 7:22 am

I'm converting an early 325 engine to later management and putting it into a 318 shell. I have a remapped chip for a motronic 325, if I put this into a 320 ECU (the engine loom donor is a 320) will it run the 325 Ok?

Cheers
Brian
For sale - E30 320i racer project - sold.
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Tue Dec 06, 2011 7:30 am

As long as the ECU is a Motronic 1.3 (1988 onwards), then you should be fine.

Check your ECU part number here:

http://www.e30zone.net/e30zonewiki/index.php/ECU
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Tue Dec 06, 2011 7:35 am

Only thing to check is if the ECU is for an auto or manual, mainly as idle speed is different.
Image
User avatar
Brian28
E30 Zone Squatter
E30 Zone Squatter
Posts: 1596
Joined: Sat Jun 11, 2005 11:00 pm
Location: Bournemouth

Post Tue Dec 06, 2011 8:00 am

Thanks chaps :thumb:
For sale - E30 320i racer project - sold.
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Tue Dec 06, 2011 8:12 am

after a re-read it is the chip that controls idle speed anyway, so if you have replaced the chip in an ECU from a Motronic 320 with a chip for a 2.5 it will work fine.
Image