Had a go at fitting the obc to my car yesterday.Followed the wiki method thats on here and everything went perfectly....until the last bits.
Im left with 3 wires that i carnt find a home for.
1st is in the engine bay...this is a black plug with brown wire and green tracer + a brown wire into it.
The other 2 are in the interior behind the glove box..these are a black plug with brown wire and green tracer + red wire with white tracer into it AND a white plug with green wire + green wire with red tracer into it.
I thought these last 2 went into the white wireing block of connecters but carnt find a home with the correct size pins?
Point me in the right direction please? I ve used the search btw,but every time i read a post i have to type the same search in again.
OBC question please?
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Green and green/red are the immobiliser plug which fits to a socket hanging from the loom above the glovebox, but my advice is don't bother. There will already be a plug in this socket.
Other two: These are the plugs for some kind of switch on one of them, and something that is controlled by that switch on the other. I've no idea what this switch and switched object is, as
I've never seen them used, or if they have ever been used in any market.
You should also have a single white plug on a yellow wire somewhere that isn't used.
Other two: These are the plugs for some kind of switch on one of them, and something that is controlled by that switch on the other. I've no idea what this switch and switched object is, as
I've never seen them used, or if they have ever been used in any market.
You should also have a single white plug on a yellow wire somewhere that isn't used.
-
csl
- E30 Zone Addict

- Posts: 2116
- Joined: Mon May 30, 2005 11:00 pm
- Location: Lancaster
OK,thankyou for the response Brian.....so just to confirm.....the only one i need to connect(should i choose to)is the green and green/red, as the rest are not used anyway?Brianmoooore wrote:Green and green/red are the immobiliser plug which fits to a socket hanging from the loom above the glovebox, but my advice is don't bother. There will already be a plug in this socket.
Other two: These are the plugs for some kind of switch on one of them, and something that is controlled by that switch on the other. I've no idea what this switch and switched object is, as
I've never seen them used, or if they have ever been used in any market.
You should also have a single white plug on a yellow wire somewhere that isn't used.
-
csl
- E30 Zone Addict

- Posts: 2116
- Joined: Mon May 30, 2005 11:00 pm
- Location: Lancaster
Also,i take it that the original anolog clock connector is now to be redundant and tucked back out of sight into the loom?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Correct on all counts!
Plugging in the green - green/red may not be straightforward, depending on what you find already plugged into the socket.
Plugging in the green - green/red may not be straightforward, depending on what you find already plugged into the socket.
-
csl
- E30 Zone Addict

- Posts: 2116
- Joined: Mon May 30, 2005 11:00 pm
- Location: Lancaster
I see.Reading the wiki it just sounded like it was a straight plug in.Oh well,i shall see exactly what is in the connection already!Brianmoooore wrote:Correct on all counts!
Plugging in the green - green/red may not be straightforward, depending on what you find already plugged into the socket.
-
csl
- E30 Zone Addict

- Posts: 2116
- Joined: Mon May 30, 2005 11:00 pm
- Location: Lancaster
Also,if someone has a photo(or would take one for me?) of the exact whereabouts to fit the horn and guard,id appreciate it.
I know its above the n/s fog light,but as to how it lies im un-sure and want to get it right.
I know its above the n/s fog light,but as to how it lies im un-sure and want to get it right.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
It fits directly underneath where the ABS pump fits. All the holes are there, so you should be able to line up the holes on the guard to see exactly where that fits, and then work out which hole is for the horn, so that it fits inside the guard.csl wrote:Also,if someone has a photo(or would take one for me?) of the exact whereabouts to fit the horn and guard,id appreciate it.![]()
I know its above the n/s fog light,but as to how it lies im un-sure and want to get it right.
-
csl
- E30 Zone Addict

- Posts: 2116
- Joined: Mon May 30, 2005 11:00 pm
- Location: Lancaster
Thanks for the info Brian,i shall get back into it on my next day off...whenever that will be! 
-
poolnoodle
- E30 Zone Squatter

- Posts: 1785
- Joined: Sat May 24, 2008 11:00 pm
- Location: Hobart, Tasmania, Australia
The alarm function is pretty useless and causes more problems than solutions. It can be easily overridden by disconnecting the power!
I agree with Brian...don't bother
I agree with Brian...don't bother
'83 Bronzit 323i (mmmm, chrome)
'74 Polaris 2002 (mmmm, retro)
'89 Delphin 535i (mmmm, waft waft)
'74 Polaris 2002 (mmmm, retro)
'89 Delphin 535i (mmmm, waft waft)
-
csl
- E30 Zone Addict

- Posts: 2116
- Joined: Mon May 30, 2005 11:00 pm
- Location: Lancaster
I had a bit of time spare today,so carried on with it for a short while.
Another question though,if i may.....with (battery connected)and ignition off/keys out, the "----uhr" symbols can still be seen,although not illuminated with back light....i take it this would be normal, for the clock operation to function?
Another question though,if i may.....with (battery connected)and ignition off/keys out, the "----uhr" symbols can still be seen,although not illuminated with back light....i take it this would be normal, for the clock operation to function?
-
mark_i
- E30 Zone Regular

- Posts: 972
- Joined: Thu Aug 10, 2006 11:00 pm
- Location: Widnes
yep, thats how the OBC works when the ignition is off.
set the time and you can see the time change even when the keys are out.
set the time and you can see the time change even when the keys are out.
-
csl
- E30 Zone Addict

- Posts: 2116
- Joined: Mon May 30, 2005 11:00 pm
- Location: Lancaster
OK.Thanks mark.mark_i wrote:yep, thats how the OBC works when the ignition is off.
set the time and you can see the time change even when the keys are out.
