compact diffs

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
321gazza
E30 Zone Regular
E30 Zone Regular
Posts: 342
Joined: Fri Sep 07, 2007 11:00 pm

Post Sat Nov 26, 2011 2:09 pm

Will a compact or even a mz3 diff fit straight onto my e30 rear subframe and could i use my e30 driveshafts.
pac1982
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5330
Joined: Fri Mar 07, 2008 11:00 pm
Location: isle of wight

Post Sat Nov 26, 2011 2:12 pm

I know you need a E30 diff for a compact so my answer would be yes.

Not many good diffs on compacts though thats why most people put E30 ones on
User avatar
blue30
E30 Zone Regular
E30 Zone Regular
Posts: 354
Joined: Wed Jan 09, 2008 11:00 pm
Location: Stoke on Trent

Post Sun Nov 27, 2011 10:42 am

I have a Z3 2.8 diff on mine, I it was a while ago but I think I used an e30 325i back plate and flanges.
User avatar
321gazza
E30 Zone Regular
E30 Zone Regular
Posts: 342
Joined: Fri Sep 07, 2007 11:00 pm

Post Sun Nov 27, 2011 9:16 pm

Would the back plate from my small case 4.10 diff cover fit a z3 diff and my driveshafts.
User avatar
bimanut
E30 Zone Camper
E30 Zone Camper
Posts: 1194
Joined: Thu Oct 30, 2008 11:00 pm
Location: Warrington

Post Sun Nov 27, 2011 9:58 pm

If blue30 used a 325 back plate then no your 4.10 wont fit.
The 325 diff is a medium case and as you say the 4.10 is a small case and have different bolt patterns.
Image
User avatar
blue30
E30 Zone Regular
E30 Zone Regular
Posts: 354
Joined: Wed Jan 09, 2008 11:00 pm
Location: Stoke on Trent

Post Mon Nov 28, 2011 10:04 am

Yes its the larger case diff you'll need bits off. Thinking back mine came without flanges so I don't know if Z3 flanges fit, I had some 325 flanges so used those. Can't honestly remember if I had to change the back plate or not but it would definitely be the 325 one if you do. You might not need to as the subframes are nearly the same. I know the old 525e diffs need a back plate change as they put the bush/mount in a different place. I ran one of those for a while (2.97) with my m50 swap till the Z3 LSD came up cheap (3.15).
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Nov 28, 2011 1:10 pm

I have a Z3 2.8 torsen slipper diff. in use, and, as far as I can remember, no backplate change was required.
Mine came with one flange missing, and now sports one Z3 flange and one E30 325 one. They are not identical - there are differences in the shield for the oil seal, but there are interchangeable.
User avatar
321gazza
E30 Zone Regular
E30 Zone Regular
Posts: 342
Joined: Fri Sep 07, 2007 11:00 pm

Post Tue Nov 29, 2011 9:15 pm

All sounds complex to me, just after a diff that will cope with 300 bhp and have a lsd that will bolt straight onto the e30 subframe and a ratio of about 3.73 or 3.64 or 3.56.
User avatar
blue30
E30 Zone Regular
E30 Zone Regular
Posts: 354
Joined: Wed Jan 09, 2008 11:00 pm
Location: Stoke on Trent

Post Wed Nov 30, 2011 10:55 am

Z3M diff will take more power than that all day long, it has a big finned cover to get the heat out but the ratio's wrong for you.

I think I'm right in saying that the compact and Z3 diffs are all much lower ratios than that :(

Unless you're sidestepping the clutch on slicks you might be best getting a 3.64 E30 diff rebuilt and sticking a Z3M cover on it. Think there's a bloke on here who does good value rebuilds but can't remember his name at the mo...
User avatar
321gazza
E30 Zone Regular
E30 Zone Regular
Posts: 342
Joined: Fri Sep 07, 2007 11:00 pm

Post Wed Nov 30, 2011 2:43 pm

Sounds good to me just need to get his name or number.
penton08
E30 Zone Camper
E30 Zone Camper
Posts: 1206
Joined: Sat May 10, 2008 11:00 pm

Post Wed Nov 30, 2011 3:06 pm

Gareth is the man you need :D
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Wed Nov 30, 2011 5:24 pm

The Compact/Z3 diffs are E30 casings with E36 internals. The output flanges have the locating circlips in different places so that whilst the flanges will swap over, they won't fully 'locate'. That shouldn't be a problem, although it's not really ideal.
User avatar
321gazza
E30 Zone Regular
E30 Zone Regular
Posts: 342
Joined: Fri Sep 07, 2007 11:00 pm

Post Thu Dec 01, 2011 11:21 am

How do i contact gareth, or will a 325i diff with lsd be ok.