Valve clearances (again)

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
James90
E30 Zone Regular
E30 Zone Regular
Posts: 271
Joined: Thu Sep 23, 2010 11:00 pm
Location: Nottingham

Post Sat Nov 19, 2011 5:39 pm

Sorry for starting another thread on valve clearances - I have done a search which as taught me all I know so far but have a few questions I couldn't definitively find the answer to.
Engine is an M20B25

I assume what you do 1 cylinder at a time - both valves?

What I understand:
clearance on stone cold engine is 0.25mm and should have some drag when sliding feeler in and out.
When the cam lobe is pointing all the way down this means the valves are closed (TDC?)
So if I have cylinder 1 cam lobe pointing down I have to use the rule of 7 which means that I now adjust the clearance on cyl 6?

cheers
'88 325i Auto Chromie Cabriolet in Alpine White
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Sat Nov 19, 2011 6:09 pm

User avatar
James90
E30 Zone Regular
E30 Zone Regular
Posts: 271
Joined: Thu Sep 23, 2010 11:00 pm
Location: Nottingham

Post Sat Nov 19, 2011 6:15 pm

I have looked at that, but that suggests that you adjust the each valve when it's lobe is pointing directly down - When doing a search on here I read conflicting views?
'88 325i Auto Chromie Cabriolet in Alpine White
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Sat Nov 19, 2011 6:43 pm

I do each valve individually starting at cyl 1, maybe cyl 5 exhaust will be shut but work on one cyl at a time and you wont go wrong.
Yes, the rocker is adjusted with the cam lob down, ie valve shut.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
User avatar
James90
E30 Zone Regular
E30 Zone Regular
Posts: 271
Joined: Thu Sep 23, 2010 11:00 pm
Location: Nottingham

Post Sat Nov 19, 2011 6:51 pm

Right so cyl 1 inlet valve lobe down. adjust. Rotate crank. cyl 1 exhaust lobe down. adjust. Rotate crank. Cyl 2... etc etc.

Sorry I'm being thick but this is the first motor I've played with that doesn't have hydraulic ones!

Cheers
'88 325i Auto Chromie Cabriolet in Alpine White
User avatar
215m3
E30 Zone Regular
E30 Zone Regular
Posts: 328
Joined: Sun Oct 23, 2005 11:00 pm

Post Sat Nov 19, 2011 8:56 pm

Hi James

Create a spreadsheet with the cylinders 1 to 6 and exhaust and inlet. When the pointed end of the lobe is pointing towards the sky, the valve will be shut. Start at the front of the engine, measure the gap with a feeler and record on the spreadsheet.

Look down the cam to find the next lobe pointing towards the sky, then rotate and repeat until they are all done. On the spreadsheet add the gap allowance and then see which are to wide, too narrow or in allowance. Swap or replace those out with the allowed tollerance.

HTH's
Toby

1987 E30 M3 S14 Turbo
1971 V12 E type Roadster
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sat Nov 19, 2011 9:37 pm

sorry toby but thats not right the lobe has to be facing down for the valve to be shut if the lobe is pointing up that means its on cam and the valve will be fully open
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Barx325i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6493
Joined: Wed Jul 26, 2006 11:00 pm

Post Sat Nov 19, 2011 9:49 pm

umm, no:

the lobe (centre line) facing up as identified in the pic below in comparison to the mid point of the base circle - should be pointing upwards, inline with the valve stem


Image
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sat Nov 19, 2011 9:51 pm

yes which means the valve is then open the valve needs to be shut to do valve clearances which needs to be pointing down
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
chh137
E30 Zone Squatter
E30 Zone Squatter
Posts: 1502
Joined: Mon Apr 18, 2011 11:00 pm
Location: deepest darkest derbyshire

Post Sat Nov 19, 2011 9:51 pm

desmodronic (spelling) valve gear on a M20B25 ?
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Sat Nov 19, 2011 9:53 pm

You sure Barx? If so, my Engine is foook 8O


http://www.e30zone.net/e30zonewiki/inde ... M20_engine

Step 6 says different...

Thats how I have set mine up, same as a few other zoners cars which I have done... :mad:
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sat Nov 19, 2011 9:55 pm

if i adjusted mine like that they would be clattering like a bitch if not brake some thing
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Sat Nov 19, 2011 10:09 pm

Rocker needs to be touching the middle of the base circle.

Image

:mad:
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sat Nov 19, 2011 10:16 pm

leeparkes wrote:Rocker needs to be touching the middle of the base circle.

Image

:mad:
+ 1 on that
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Nov 19, 2011 10:19 pm

M20 engine has rockers, so the cam opens the valve when the lobes are pointing up! As a consequence of this you adjust the clearance on a particular lobe when it's pointing down.
When 6 is pointing up; i.e the valves on 6 are open, adjust 1.
Turn the crankshaft forwards 60 degrees, with a 22mm spanner on the crank bolt, and the valves on 2 will be open, so adjust 5. Keep going, 60 degrees at a time, until you have turned the crank two full turns and the job will be done.
If you're not confident of knowing what a "sliding fit" is for the feeler gauge, check with another one 1 thou' thinner, which should go in easily, and another one 1 thou' thicker, which should need forcing in.
User avatar
James90
E30 Zone Regular
E30 Zone Regular
Posts: 271
Joined: Thu Sep 23, 2010 11:00 pm
Location: Nottingham

Post Sun Nov 20, 2011 12:30 am

Right, I think I know what I'm doing now chaps thanks for the input!
Will have a go tomorrow.
'88 325i Auto Chromie Cabriolet in Alpine White