Hi there,
I'm the guy that has started this thread a while ago, my problems are exactly the same,
i changed all the ignition parts and it's still the same, I told my mechanic about the cam, he said it wouldn't be that because the engine is not tappetty,
it's at exactly 4k rpm, it sounds like it splutters, then changes up a gear, then re sets itself after losing a bit of power, mine is an auto though but from what you've described it's exactly the same problem as mine has.
It doesn't bother me too much because i never floor it anyway but it's pretty annoying and obviously doing the car no good, i'd like it sorting but with crimbo round the corner I can't be replacing parts willy nilly bro so any help when you've sorted it would be much appreciated!
Could just be paranoid but i feel like mine is using more fuel than it should aswell cos i'm getting the same mpg out of my 325 so something can't be right.
misfire at 4k RPM
Moderator: martauto
-
domkolo
- E30 Zone Regular

- Posts: 437
- Joined: Sat Nov 27, 2010 11:00 pm
yes it is this issue, I still need it sorting too, blingsta has just described it better than i haveGrrrmachine wrote:Sure it's not the same issue as in the other thread?
http://www.e30zone.net/modules.php?name ... c&t=208872
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
An unjustified assumption on this engine!domkolo wrote: I told my mechanic about the cam, he said it wouldn't be that because the engine is not tappetty
-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
sorry Brian, what does the above mean? are you assuming the cam to be worn?Brianmoooore wrote:An unjustified assumption on this engine!domkolo wrote: I told my mechanic about the cam, he said it wouldn't be that because the engine is not tappetty
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
the M40 is renown for cam wear especially on badly serviced/ill treated cars,
the lobe on the cam wears away and when the cam lobe/followers have worn the valves aren't depressed properly, this leads to only revving up to around 4-5k,
IIRC a kit is around £150 + fitting
the lobe on the cam wears away and when the cam lobe/followers have worn the valves aren't depressed properly, this leads to only revving up to around 4-5k,
IIRC a kit is around £150 + fitting
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
I've no idea if your cam is worn without seeing it, but the fact that the "engine isn't tappetty" is no indicator that it isn't.
-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
ok chaps.. many thanks for the input... considering that everything else has been changed or replaced... the ONLY other thing to go ahead and change is the cam...
i'll keep my fingers crossed
i'll keep my fingers crossed
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Just run a finger across the top of the cam lobes. There's a narrow bit (not polished) each side that doesn't get used. If there's the slightest step down into the polished bit, the cam is worn.
-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
will update once cam is changed for a good 2nd hand one..
or is a new one a better option?
or is a new one a better option?
-
blingsta
- Boost Junkie
- Posts: 2930
- Joined: Fri Jan 27, 2006 11:00 pm
- Location: Enfield
Brian.. any chance you can point out the bit i need to check for the damage pls.. i found this picture on google if it helps?Brianmoooore wrote:Just run a finger across the top of the cam lobes. There's a narrow bit (not polished) each side that doesn't get used. If there's the slightest step down into the polished bit, the cam is worn.
http://www.fabdirect.com/BMW_Parts_imag ... 9580_2.jpg
-
Speedtouch
- Old Skooler

- Posts: 14130
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
