Rear Bearings / Flanges etc.

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
greggers
E30 Zone Newbie
E30 Zone Newbie
Posts: 135
Joined: Mon Jul 04, 2011 11:00 pm

Post Sun Nov 13, 2011 6:09 pm

Had a bit of a nightmare/set-back yesterday on the rear disc conversion.

Started to build up what we thought were two identical trailing arms (we had a third which was rotten) only to find that one aparently came from a pre-09/85 car and uses a different size bearing, my fault completely, should have done more investigation pre-purchase. I must admit we were a bit surprised these smaller bearings only lasted for a few months of production.

So, ideally we want to use later arms... Both of the hub flanges we have are for the smaller bearings, so we'll be needing them as well. Although when stripping down the rear yesterday I noticed the ones on the drums look identical so I'm hoping we can use these, does anyone know?

Also, the dive shafts, are they the same for early/late bearings? I can't imagine them being different.

We have found somewhere with a 1991 318is Cab which the breaker thinks has rear discs and I'm inclined to agree, so we'll be stripping that next weekend. I guess you can never have too many rear suspension parts

Nothing's ever simple is it!?
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Sun Nov 13, 2011 7:57 pm

318is cab? No such thing produced.
Probably a 318i I dont think those had rear discs
User avatar
greggers
E30 Zone Newbie
E30 Zone Newbie
Posts: 135
Joined: Mon Jul 04, 2011 11:00 pm

Post Sun Nov 13, 2011 8:05 pm

Yeah you're right, I've just looked on real oem and they don't exist.

However if I put in a '91 cab, it does come up as having rear discs, so I think I was at least half right.
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Sun Nov 13, 2011 9:28 pm

greggers wrote:Yeah you're right, I've just looked on real oem and they don't exist.

However if I put in a '91 cab, it does come up as having rear discs, so I think I was at least half right.
really? wouldn't trust in realoem 100% though, also their diagrams are a bit mis leading and some of the engine stuff regarding the 318is m42 is wrong.

I was under the assumption only tourings and 325is and 318is had rear discs.
User avatar
greggers
E30 Zone Newbie
E30 Zone Newbie
Posts: 135
Joined: Mon Jul 04, 2011 11:00 pm

Post Sun Nov 13, 2011 10:33 pm

Well the breaker is only down the road and he's going to start stripping the bits we've asked for tomorrow, pretty sure he'll let us know if they aren't discs tomorrow. If not I'm sure we'll find some somewhere.

When I put in my model (87 320i) both drums and discs come up as an option. For a '91 318i cab I only get one option, discs. For a '91 318i coupe I get discs and drums again.

The other odd thing of note is that a 318i cab was only available from mid 1990 on, which makes me think BMW might have fitted discs to it for the whole time it was available.

From what I can work out, these reduced sized trailing arms can only have come from a pre-85 323i
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Nov 14, 2011 12:15 am

All cabs, tourings and 325 saloons have rear discs, as do any lesser E30 that was ordered with ABS.
User avatar
greggers
E30 Zone Newbie
E30 Zone Newbie
Posts: 135
Joined: Mon Jul 04, 2011 11:00 pm

Post Mon Nov 14, 2011 8:12 am

Brianmoooore wrote:All cabs, tourings and 325 saloons have rear discs, as do any lesser E30 that was ordered with ABS.
Music to my ears, cheers.