M42 head re-build- valve stem seals wrong!!!!

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jonesy318
E30 Zone Newbie
E30 Zone Newbie
Posts: 212
Joined: Thu Dec 24, 2009 11:00 pm
Location: Peterborough..

Post Mon Nov 07, 2011 7:32 pm

Hi guys i need some knowledge and advise please!!!!!! i have an m42 which i'm re-building to go in place of my m40. engine is in the process of going back together and the head set that has turned up is complete crap...... the valve stem seals are too big, the head gasket doesn't go over the dowels in the block and profile gasket is to small.. I've checked with the people supplying it and they are adament this is the correct set. Are there different size valves or are they being completely useless,they have said its a later engine from an e36. when i collected the engine it has e30 manifolds and also has the idler on the chain instead of the guide. Any help on this is so gratefully appreciated, cheers.......... :? :?
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Post Mon Nov 07, 2011 10:16 pm

The later model E36 was fitted with the m44 rather than the m42. All M42s have the same size valves.
User avatar
tim_s
E30 Zone Squatter
E30 Zone Squatter
Posts: 1661
Joined: Thu Feb 03, 2005 11:00 pm
Location: Bristol/London

Post Tue Nov 08, 2011 2:54 pm

the above's wrong, later m42s have 6mm valve stems, earlier ones 7mm. Not sure on the HG and the profile gasket, got part nos?
Image
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
dsm2002
E30 Zone Newbie
E30 Zone Newbie
Posts: 81
Joined: Sat Aug 23, 2008 11:00 pm
Location: Canberra

Post Thu Nov 10, 2011 10:31 am

There are three upper gasket sets:

before 09/1992 11129063333
09/1992-09/1993 11129065439
From 09/1993 11129066434

With an idler cog, it'd be a pre-sep 1993 engine. The 9/93 production date signalled the front timing chain idler/deflection rail change.

From 9/92, E36 M42s have 6mm valve stems. I am fairly certain that the change from 7mm to 6mm stems coincided with a change to single valve springs. Does it have single or double valve springs? Singles should mean post sept 1992.


HTH
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Thu Nov 10, 2011 10:48 am

Early E36s had M42s with M43s, and M44s showing up later.
User avatar
jonesy318
E30 Zone Newbie
E30 Zone Newbie
Posts: 212
Joined: Thu Dec 24, 2009 11:00 pm
Location: Peterborough..

Post Thu Nov 10, 2011 6:48 pm

Cheers guys, it has 6mm valves which i've now got stem seals for, have had another head gasket turn up which is fine now, never get cheap parts again !!!!!!!!!!!!!!! :D