M42 head re-build- valve stem seals wrong!!!!
Moderator: martauto
-
jonesy318
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Dec 24, 2009 11:00 pm
- Location: Peterborough..
Hi guys i need some knowledge and advise please!!!!!! i have an m42 which i'm re-building to go in place of my m40. engine is in the process of going back together and the head set that has turned up is complete crap...... the valve stem seals are too big, the head gasket doesn't go over the dowels in the block and profile gasket is to small.. I've checked with the people supplying it and they are adament this is the correct set. Are there different size valves or are they being completely useless,they have said its a later engine from an e36. when i collected the engine it has e30 manifolds and also has the idler on the chain instead of the guide. Any help on this is so gratefully appreciated, cheers..........

-
DHFiS
- Old Skooler

- Posts: 2733
- Joined: Sat Aug 12, 2006 11:00 pm
- Location: cambridge
The later model E36 was fitted with the m44 rather than the m42. All M42s have the same size valves.
-
tim_s
- E30 Zone Squatter

- Posts: 1661
- Joined: Thu Feb 03, 2005 11:00 pm
- Location: Bristol/London
-
dsm2002
- E30 Zone Newbie

- Posts: 81
- Joined: Sat Aug 23, 2008 11:00 pm
- Location: Canberra
There are three upper gasket sets:
before 09/1992 11129063333
09/1992-09/1993 11129065439
From 09/1993 11129066434
With an idler cog, it'd be a pre-sep 1993 engine. The 9/93 production date signalled the front timing chain idler/deflection rail change.
From 9/92, E36 M42s have 6mm valve stems. I am fairly certain that the change from 7mm to 6mm stems coincided with a change to single valve springs. Does it have single or double valve springs? Singles should mean post sept 1992.
HTH
before 09/1992 11129063333
09/1992-09/1993 11129065439
From 09/1993 11129066434
With an idler cog, it'd be a pre-sep 1993 engine. The 9/93 production date signalled the front timing chain idler/deflection rail change.
From 9/92, E36 M42s have 6mm valve stems. I am fairly certain that the change from 7mm to 6mm stems coincided with a change to single valve springs. Does it have single or double valve springs? Singles should mean post sept 1992.
HTH
-
Royalratch
- E30 Zone Addict

- Posts: 4921
- Joined: Sat Oct 21, 2006 11:00 pm
- Location: London
Early E36s had M42s with M43s, and M44s showing up later.
-
jonesy318
- E30 Zone Newbie

- Posts: 212
- Joined: Thu Dec 24, 2009 11:00 pm
- Location: Peterborough..
Cheers guys, it has 6mm valves which i've now got stem seals for, have had another head gasket turn up which is fine now, never get cheap parts again !!!!!!!!!!!!!!! 

