only revving to 4500 rpm?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
domkolo
E30 Zone Regular
E30 Zone Regular
Posts: 437
Joined: Sat Nov 27, 2010 11:00 pm

Post Mon Nov 07, 2011 1:33 pm

my 318i auto cab only revs to 4500rpm when i put my foot down, stays at those revs, then changes gear after 2-3 seconds

I've been told a mixture of things like the distributor cap,rotor arm, leads and plugs need changing,

does this problem sound familiar to anyone and would you know what it'd be?
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Mon Nov 07, 2011 1:42 pm

Tried holding it in gear?
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
greg124
E30 Zone Regular
E30 Zone Regular
Posts: 668
Joined: Tue Apr 03, 2007 11:00 pm
Location: In the pub

Post Mon Nov 07, 2011 4:48 pm

worn camshaft, possibly?
Schadenfreude - the German's haven't got a word for that.
pacerpete
E30 Zone Team Member
E30 Zone Team Member
Posts: 18165
Joined: Sun Jan 23, 2005 11:00 pm
Location: Iver heath. South bucks.

Post Mon Nov 07, 2011 7:35 pm

greg124 wrote:worn camshaft, possibly?
This :(

Worn camgear / lifters is the most common reason for an elderly M40 to not pull to the redline . They don't neccessarily need to sound dire to suffer from this ailment either .
Last edited by pacerpete on Mon Nov 07, 2011 7:49 pm, edited 1 time in total.
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Mon Nov 07, 2011 7:41 pm

toblerone cam syndrome, :eek:
User avatar
redcar
E30 Zone Squatter
E30 Zone Squatter
Posts: 1610
Joined: Wed Jul 20, 2011 11:00 pm
Location: Hertfordshire

Post Mon Nov 07, 2011 11:51 pm

Mine did this, doesn't rev past 5000, then when I shifted, it still spluttered for a few seconds.

Was advised that the camshaft was gone. A chap came up with a funny saying for the noise it made on idle. Tappety it was! Good luck
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Tue Nov 08, 2011 1:21 am

first off all i would eliminate the autobox with some fresh oil and a new filter.

however if your engine sounds tappety then its 99% going to be a wanker cam

try holding it in gear, my 318i auto changes at 5000rpm but if you hold it in gear goes to revlimit easily. ive yet to change oil and filter.
User avatar
domkolo
E30 Zone Regular
E30 Zone Regular
Posts: 437
Joined: Sat Nov 27, 2010 11:00 pm

Post Tue Nov 08, 2011 8:43 am

thanks for the advice guys, hopefully pacerpete will be able to make good sense of what the problem is this weekend!

it changes fine when im just plodding along but when i hold it in gear it sits on 4500 and splutters for 2-3 seconds before changing up a gear, then it feels like it's down on power,

I had a chap look at it and the weekend when i had a few neccessary bits done. he said the auto box was fine so i guess it all adds up to be the cam shaft like you guys have kindly advised!

nice one!
User avatar
AlpineAde
E30 Zone Team Member
E30 Zone Team Member
Posts: 3829
Joined: Sun Feb 25, 2007 11:00 pm
Location: Melbourne, Australia

Post Wed Nov 09, 2011 2:57 am

How's your coil, OP?
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Wed Nov 09, 2011 6:39 am

"skeleton wanking into a dustbin" was the phrase used to describe a knackered cam :D
User avatar
blingsta
Boost Junkie
Posts: 2930
Joined: Fri Jan 27, 2006 11:00 pm
Location: Enfield

Post Wed Nov 09, 2011 10:42 pm

is this sorted? ive just started a thread for a mates 318i revving to 4k then misfiring ? its not a auto though... ?? well confused..