which pins to reset service lights?
Moderator: martauto
-
rix313
- E30 Zone Team Member

- Posts: 4970
- Joined: Fri Oct 31, 2008 11:00 pm
- Location: Silverstone
Just a quick one, which pins do I need to join in the diagnostic plug to reset the service light?
-
threelander
- E30 Zone Camper

- Posts: 1166
- Joined: Fri Jan 14, 2011 11:00 pm
12 and 15 if i remember correctly
-
torquey
- E30 Zone Regular

- Posts: 263
- Joined: Wed Oct 13, 2010 11:00 pm
- Location: s devon
I think you will find it`s pin 7 to 19,
-
kolee
- E30 Zone Regular

- Posts: 645
- Joined: Sat Aug 06, 2011 11:00 pm
- Location: Painswick, Gloucestershire
I think its different on the pre and facelift models. Which is yours?
-
torquey
- E30 Zone Regular

- Posts: 263
- Joined: Wed Oct 13, 2010 11:00 pm
- Location: s devon
it worked on my car it`s a pre facelift , my understanding is any car- post 1987 have a 20 pin connecter so it should be 7 to 19 ground,
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
Ebay. £7 buy the tool.. Will do all bmws from 1982 - 2001!
E30 Crazy!
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
its on here a number of times, brian has posted it up quite a lot so it should come up with a search.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
The reset pin is 7, it needs to be grounded. I personally link 7 and 11 (as 11 is grounded eventually) and requires a two inch piece of wire, same is achieved with a longer piece from 7 to ground such as inlet manifold. This is for ALL e30's, but note prefacelift have the pin numbers inside the cover and are over their pin number when cap is ON. Facelift have pin numbers next to their pins.
Ignition off, ground pin 7, ignition on wait 5-10 seconds, ignition off and repeat to reset oil inspection light and service lights.
Ignition off, ground pin 7, ignition on wait 5-10 seconds, ignition off and repeat to reset oil inspection light and service lights.

-
mrLEE30
- E30 Zone Team Member

- Posts: 6589
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Sweating buckets in Bahrain
Just a note to say pin 19 also grounded, but early models only have 15pins, so no 19. 11 is grounded on all models.

-
e301988325i
- E30 Zone Addict

- Posts: 3701
- Joined: Fri Feb 01, 2008 11:00 pm
- Location: Taunton, Somerset
I have pretty pictures of both early and late sockets and which pins reset the lights, I'll E-mail to you if you PM your address.
I said:
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
Can anyone suggest how to test if the boot lights are staying on with the boot shut?
e30topless said:
lock the wife in there
