which pins to reset service lights?

Need technical Q/A then you're in the right place

Moderator: martauto

rix313
E30 Zone Team Member
E30 Zone Team Member
Posts: 4970
Joined: Fri Oct 31, 2008 11:00 pm
Location: Silverstone

Post Mon Oct 31, 2011 8:05 pm

Just a quick one, which pins do I need to join in the diagnostic plug to reset the service light?
User avatar
threelander
E30 Zone Camper
E30 Zone Camper
Posts: 1166
Joined: Fri Jan 14, 2011 11:00 pm

Post Mon Oct 31, 2011 8:15 pm

12 and 15 if i remember correctly
User avatar
torquey
E30 Zone Regular
E30 Zone Regular
Posts: 263
Joined: Wed Oct 13, 2010 11:00 pm
Location: s devon

Post Mon Oct 31, 2011 8:35 pm

I think you will find it`s pin 7 to 19,
kolee
E30 Zone Regular
E30 Zone Regular
Posts: 645
Joined: Sat Aug 06, 2011 11:00 pm
Location: Painswick, Gloucestershire

Post Mon Oct 31, 2011 8:36 pm

I think its different on the pre and facelift models. Which is yours?
User avatar
torquey
E30 Zone Regular
E30 Zone Regular
Posts: 263
Joined: Wed Oct 13, 2010 11:00 pm
Location: s devon

Post Mon Oct 31, 2011 8:51 pm

it worked on my car it`s a pre facelift , my understanding is any car- post 1987 have a 20 pin connecter so it should be 7 to 19 ground,
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Mon Oct 31, 2011 9:20 pm

Ebay. £7 buy the tool.. Will do all bmws from 1982 - 2001!
E30 Crazy!
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Post Tue Nov 01, 2011 11:30 am

its on here a number of times, brian has posted it up quite a lot so it should come up with a search.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Tue Nov 01, 2011 2:31 pm

The reset pin is 7, it needs to be grounded. I personally link 7 and 11 (as 11 is grounded eventually) and requires a two inch piece of wire, same is achieved with a longer piece from 7 to ground such as inlet manifold. This is for ALL e30's, but note prefacelift have the pin numbers inside the cover and are over their pin number when cap is ON. Facelift have pin numbers next to their pins.

Ignition off, ground pin 7, ignition on wait 5-10 seconds, ignition off and repeat to reset oil inspection light and service lights.
Image
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Tue Nov 01, 2011 2:43 pm

Just a note to say pin 19 also grounded, but early models only have 15pins, so no 19. 11 is grounded on all models.
Image
e301988325i
E30 Zone Addict
E30 Zone Addict
Posts: 3701
Joined: Fri Feb 01, 2008 11:00 pm
Location: Taunton, Somerset

Post Tue Nov 01, 2011 6:56 pm

I have pretty pictures of both early and late sockets and which pins reset the lights, I'll E-mail to you if you PM your address.
I said:

Can anyone suggest how to test if the boot lights are staying on with the boot shut?

e30topless said:

lock the wife in there