- New Standard Top Mounts
- New Front Hubs/Bearings
- New Wishbones + Bushes
- Standard Front Discs
- Standard 15" Wheels
I fitted the standard discs for testing purposes (as I am going to be fitting a WMS set in the near future), then bolted up the standard 15" wheels which I will be using. These are fitted with the standard size 205/50/15 tyres. The wheels had budgets on which highlighted this issue, and I've since fitted some 205/50/15 Michelin Pilot Sport Cups which are the same dimensions anyway.
The tyre rubs on the coilover like its too close to the hub, the wheel physically does not turn. I fitted 10mm spacers to one side to see what difference it made, it did improve it but the tyre still touches - which is completely pointless as I didn't want to run spacers anyway. As you can see from the pics below..

10mm Spacer Fitted:

No Spacer:

Few Other Pics:



As you can see the car is at a reasonable hight, coilover adjuster is set halfway so not stupidly low..

Has anyone experienced similar issues with Gaz coilovers?
Are 318iS and 325i front hubs/stubs different (part with the bearing)..
Im currently in the middle of contacting the supplier/Gaz anyway, but thought I would post up to see!
Cheers.












