So I have the radio head unit out at the moment, and while it is, it seems a good time to think about swapping the analogue clock for the 6 button.
I have the one that comes in a 318i of 91 vintage, and is going into a 318is. Are all the necessary wires present regardless of what sits in that space, or is it a quite large job putting in a loom, and maybe even a temp sensor, which I believe resides near the passenger side fog light?
If its a tricky job, Ill do without, but I will miss that reassuring 'BONG' when the temp makes the roads risky.
Swapping the Analogue clock for 6 button OBC.
Moderator: martauto
-
gnarkillius
- E30 Zone Newbie

- Posts: 234
- Joined: Sun Dec 09, 2007 11:00 pm
- Location: Pompey/Manchester
-
gnarkillius
- E30 Zone Newbie

- Posts: 234
- Joined: Sun Dec 09, 2007 11:00 pm
- Location: Pompey/Manchester
Ah i just found the guide in the wiki.
http://www.e30zone.net/e30zonewiki/inde ... g_OBC_unit
I think ill wait until i have a more pressing need to pull the dash to bits.
http://www.e30zone.net/e30zonewiki/inde ... g_OBC_unit
I think ill wait until i have a more pressing need to pull the dash to bits.
