Swapping the Analogue clock for 6 button OBC.

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
gnarkillius
E30 Zone Newbie
E30 Zone Newbie
Posts: 234
Joined: Sun Dec 09, 2007 11:00 pm
Location: Pompey/Manchester

Post Wed Oct 26, 2011 8:20 pm

So I have the radio head unit out at the moment, and while it is, it seems a good time to think about swapping the analogue clock for the 6 button.

I have the one that comes in a 318i of 91 vintage, and is going into a 318is. Are all the necessary wires present regardless of what sits in that space, or is it a quite large job putting in a loom, and maybe even a temp sensor, which I believe resides near the passenger side fog light?

If its a tricky job, Ill do without, but I will miss that reassuring 'BONG' when the temp makes the roads risky.
User avatar
gnarkillius
E30 Zone Newbie
E30 Zone Newbie
Posts: 234
Joined: Sun Dec 09, 2007 11:00 pm
Location: Pompey/Manchester

Post Wed Oct 26, 2011 8:27 pm

Ah i just found the guide in the wiki.

http://www.e30zone.net/e30zonewiki/inde ... g_OBC_unit

I think ill wait until i have a more pressing need to pull the dash to bits.