320i engine noise

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
jimbob29
E30 Zone Regular
E30 Zone Regular
Posts: 266
Joined: Tue Apr 26, 2011 11:00 pm
Location: isle of wight

Post Mon Oct 24, 2011 11:52 am

i have this rumbling metallic sound from the front of the engine around the distributor cap area when warmed up and cant figure out if its a cam problem its not that loud and doesnt get louder when revs increase?car still runs perfectly.how can tell if its the cam?
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Mon Oct 24, 2011 12:01 pm

When did you last change the oil?
User avatar
jimbob29
E30 Zone Regular
E30 Zone Regular
Posts: 266
Joined: Tue Apr 26, 2011 11:00 pm
Location: isle of wight

Post Mon Oct 24, 2011 12:13 pm

3 months ago 10w 40 allways checked weekly it might be one of pulleys but can be sure?
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Mon Oct 24, 2011 12:37 pm

Water pump bearing failure?
E30 Crazy!
User avatar
jimbob29
E30 Zone Regular
E30 Zone Regular
Posts: 266
Joined: Tue Apr 26, 2011 11:00 pm
Location: isle of wight

Post Mon Oct 24, 2011 1:05 pm

it does sound louder on that side but bloody cant pin point the sound :-x if it was the cam would you hear it all along the rocker cover?its only when engine is up to temp so heat must be playing a part in it?its either water pump bearing or one of the pulleys and its around distributor area
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Mon Oct 24, 2011 7:09 pm

Remove the rocker cover and check the camshaft lobes for wear and pitting. If all is well, then strip the aux belts and feel all the pulleys for play and wear. If all is well there, then id go checking the water pump

My 320i used to make a slight rumbling noise when at running temp and it turned out to be a worn out water pump. New pump and belt fitted. Rumbling gone... But check all the pulleys first
E30 Crazy!
mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Mon Oct 24, 2011 7:43 pm

had the same a few weeks back but mine was constant noise, with yours i would run it up to temperature, switch off, slack off the belts, pull em off the pullys and fire it up again briefly, if the noise is still there that will eliminate w.pump, viscous, p.a.s pump, alt,
if it stops you know its one of the above. dont let it run for more than a min though as you dont want it to heat up too much and make sure the belts are well out of the way when you fire it up.
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Mon Oct 24, 2011 10:14 pm

Don't turn the engine over with the timing belt slack. I know its plain common knowlegde but hey.
E30 Crazy!
mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Mon Oct 24, 2011 10:48 pm

Ajsingh wrote:Don't turn the engine over with the timing belt slack. I know its plain common knowlegde but hey.
lol that would be funny as fook!! clang bang oh shit...... :eek: