okay this should be an easy one!
ive got the z3 shifter to go into my e30 m52.
in order to put the ball joint of the lever into the plastic socket do i just press the lever in from the top side?
orrrrrrrrr does the ball go into the socket beforehand and then both parts go into the metal housing?
The only reason i ask is the plastic socket is brand new so im very paranoid about breaking it! (i dont want to wait for a new one!)
cheers,
Matt
gear leaver replacement
Moderator: martauto
-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
-
bimanut
- E30 Zone Camper

- Posts: 1194
- Joined: Thu Oct 30, 2008 11:00 pm
- Location: Warrington
I`m pretty sure you put the lever into the palstic socket then put the socket into the cradel and then turn the socket to lock it in place

-
randomspeedfreak
- E30 Zone Regular

- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
ok cheers matebimanut wrote:I`m pretty sure you put the lever into the palstic socket then put the socket into the cradel and then turn the socket to lock it in place
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Correct - IIRC when I did mine i used a pair of long nose pliers to turn the socket until the lugs clicked into place - it is quite stiff too turn so be patientbimanut wrote:I`m pretty sure you put the lever into the palstic socket then put the socket into the cradel and then turn the socket to lock it in place

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
