gear leaver replacement

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
randomspeedfreak
E30 Zone Regular
E30 Zone Regular
Posts: 992
Joined: Mon Mar 15, 2010 11:00 pm
Location: Bristol

Post Mon Oct 24, 2011 7:37 pm

okay this should be an easy one!

ive got the z3 shifter to go into my e30 m52.

in order to put the ball joint of the lever into the plastic socket do i just press the lever in from the top side?

orrrrrrrrr does the ball go into the socket beforehand and then both parts go into the metal housing?

The only reason i ask is the plastic socket is brand new so im very paranoid about breaking it! (i dont want to wait for a new one!)

cheers,
Matt
User avatar
bimanut
E30 Zone Camper
E30 Zone Camper
Posts: 1194
Joined: Thu Oct 30, 2008 11:00 pm
Location: Warrington

Post Mon Oct 24, 2011 7:40 pm

I`m pretty sure you put the lever into the palstic socket then put the socket into the cradel and then turn the socket to lock it in place
Image
User avatar
randomspeedfreak
E30 Zone Regular
E30 Zone Regular
Posts: 992
Joined: Mon Mar 15, 2010 11:00 pm
Location: Bristol

Post Tue Oct 25, 2011 2:10 am

bimanut wrote:I`m pretty sure you put the lever into the palstic socket then put the socket into the cradel and then turn the socket to lock it in place
ok cheers mate :)
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Tue Oct 25, 2011 7:17 am

bimanut wrote:I`m pretty sure you put the lever into the palstic socket then put the socket into the cradel and then turn the socket to lock it in place
Correct - IIRC when I did mine i used a pair of long nose pliers to turn the socket until the lugs clicked into place - it is quite stiff too turn so be patient :wink:
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite