ideas on the best way to take the sump off my m50 e30
Moderator: martauto
-
DRIFT1
- E30 Zone Newbie

- Posts: 73
- Joined: Wed Dec 22, 2010 11:00 pm
- Location: Queensferry north wales
hello folks has any 1 got an easy way to take the sump off me m50 that is in my e30 i have cracked me sump and need to change it 
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
No easy way about it, you either support the engine and remove the crossmember or remove the engine.
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
You could turn the car on its side, undo everything, wedge an exhaust pipe in for leverage and shout, swear and wrap your knuckles....
That is what I did when I got mine from the scrapyard
That is what I did when I got mine from the scrapyard
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
BenHar
- E30 Zone Addict

- Posts: 3089
- Joined: Sun Jul 11, 2010 11:00 pm
- Location: Reigate, Surrey
Angle grinder FTW.
-
mr_dink
- E30 Zone Regular

- Posts: 812
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Huddersfield
I'd recommend lifting the engine rather than dropping the subframe as the subframe bolts have been known to shear off when moved for the first time in 20+ years.
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Id lower the subframe

-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
Drift1, when are you attempting this? I'm only a few clicks from you & don't mind getting my hands filthy on the way back from grandmas tea and scones on the weekend.
-
DRIFT1
- E30 Zone Newbie

- Posts: 73
- Joined: Wed Dec 22, 2010 11:00 pm
- Location: Queensferry north wales
thanks every 1 i thought of dropping the frame and taking the engine out tought of the angle grineder to thanks barx my mate is starting it while am away am going to get on it with him when am back we have just done the sump on his m20 that was alot easyer than mine were about are you from barx325i
-
DRIFT1
- E30 Zone Newbie

- Posts: 73
- Joined: Wed Dec 22, 2010 11:00 pm
- Location: Queensferry north wales
another thing does any 1 no where i can get a sump from ha ha
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
Based near chester.. My gran is on the wirral - so q.ferry is a half way house for me.
If you can't get a replacement sump, and yours isn't totally smashed, there will be an alloy welder local to you - plus it'll be stronger for next time
If you can't get a replacement sump, and yours isn't totally smashed, there will be an alloy welder local to you - plus it'll be stronger for next time
-
DRIFT1
- E30 Zone Newbie

- Posts: 73
- Joined: Wed Dec 22, 2010 11:00 pm
- Location: Queensferry north wales
i can get it alloy welded just wondering if there was 1 about any were
-
mattycoops43
- E30 Zone Regular

- Posts: 471
- Joined: Sun Jan 02, 2011 11:00 pm
- Location: Newport, South Wales
It will be cheaper to buy a new one than alloy welding, unless you can get REAL mates rates. When I broke mine, I was quoted a minimum of £50/inch from all the alloy welders near me, some were more. 
1990 325i se "weinrot"-How did they know?
-
Barx325i
- Engaged to the E30 Zone

- Posts: 6493
- Joined: Wed Jul 26, 2006 11:00 pm
£50/inch that's a bit extortionate really
give this a click:
http://www.yell.com/ucs/UcsSearchAction ... omplete=cn
give this a click:
http://www.yell.com/ucs/UcsSearchAction ... omplete=cn
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
£50 for an inch of weld is daylight robbery, I really find it hard to believe anybody would pay that. £50 per hour would be more realistic
-
mattycoops43
- E30 Zone Regular

- Posts: 471
- Joined: Sun Jan 02, 2011 11:00 pm
- Location: Newport, South Wales
I didn't pay it, I am not stupid! but that was the cheapest quote I could get for ali welding where I live, and that was if I removed the sump and delivered it to them, degreased. I was not amused.
1990 325i se "weinrot"-How did they know?
-
BATTS91
- E30 Zone Squatter

- Posts: 1764
- Joined: Sat May 01, 2010 11:00 pm
- Location: clacton on sea essex
i jacked my engine up with trolley jack and a block of wood on alternator bit dodgy but done the job the poped of the steering rack bout 45 min took me and i had mine welded for free ;) lol
-
DRIFT1
- E30 Zone Newbie

- Posts: 73
- Joined: Wed Dec 22, 2010 11:00 pm
- Location: Queensferry north wales
to let you all no the progress the bitch is out
