broken e30 325i....help
Moderator: martauto
-
bonnacab
- E30 Zone Newbie

- Posts: 62
- Joined: Wed Mar 28, 2007 11:00 pm
I have a broken rocker arm on my M20. i am looking to do the repair myself. i have read the head has to come off,is this so?is it easier to change heads rather than stripping one to make good......thanks.
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Which rocker broke?
If its near number 6 cyl its easier to change as the rail slides out only a bit to swap the rocker. If its on number 1 cyl the rail has to be slid right out and other rockers removed to get to it.
BUT if you have a broken rocker you will be very lucky not to have a bent valve to go with it.
If its near number 6 cyl its easier to change as the rail slides out only a bit to swap the rocker. If its on number 1 cyl the rail has to be slid right out and other rockers removed to get to it.
BUT if you have a broken rocker you will be very lucky not to have a bent valve to go with it.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
VW-will
- E30 Zone Regular

- Posts: 369
- Joined: Sun Apr 25, 2010 11:00 pm
I have m20 rockers if you need them, let me know...
-
n1tr0_9
- E30 Zone Camper

- Posts: 1083
- Joined: Tue Aug 14, 2007 11:00 pm
- Location: Kent (the shame)
I have a good 325i head if you need one. Also have a 320i head too.
-
jimbom30cab
- Tech 1 freak
- Posts: 7631
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
yer, changing the head for a good one sounds best bet to me, plus the added benefit of having a nice new head gasket. The zone is great for this stuff, it wasn't that long ago when a replacement head would have cost mega bucks. 
-
bonnacab
- E30 Zone Newbie

- Posts: 62
- Joined: Wed Mar 28, 2007 11:00 pm
have decided to change head as number 4 rocker broke.on inspection yes the valve was bent,the whole head was a bit shot really.got a head off a zoner seems okay apart from 2 exhaust valves not wanting to come out the guide,the tops had mushroomed .can i reuse or are the tops now weakened? should i replace?
-
mrb27
- E30 Zone Regular

- Posts: 345
- Joined: Wed Nov 17, 2010 11:00 pm
- Location: Essex
imo while the head is off if there is anything untoward, replace it! you would hate yourself if you cut a corner while fitting it and something went wrong 2 months later 
-
leeparkes
- Married to the E30 Zone

- Posts: 9535
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
