Oil Cooler m20
Moderator: martauto
-
tom325sport
- E30 Zone Regular

- Posts: 819
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Guernsey
Engine is out the car (M20 - 2.5) I won't be putting the oil cooler back on, what do I do with 2 holes where the 2 oil cooler pipes went near the oil filter?
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
completely remove the oil cooler housing and fit the stub from the 320i
-
tom325sport
- E30 Zone Regular

- Posts: 819
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Guernsey
Yes the oil cooler is already off, sorry what do you mean the by the 'stub'? Thanks
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
I have been trying to find it on real OEM but can't
, they cost about £4 from the dealers,
it's basically what holds the filter to the M20 block on a 320i they don't use the cooler, and since the cooler housing is prone to leaking then it's the best option to remove it and fit the oil filter direct to the block
it's basically what holds the filter to the M20 block on a 320i they don't use the cooler, and since the cooler housing is prone to leaking then it's the best option to remove it and fit the oil filter direct to the block
-
tom325sport
- E30 Zone Regular

- Posts: 819
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Guernsey
OK I see. I'll try and find it on OEM. Thanks
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
I think it's #5 on here: http://bmwfans.info/parts/catalog/E30/T ... ine_block/
-
tom325sport
- E30 Zone Regular

- Posts: 819
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Guernsey
Thanks Brian. So number 5 shown goes into block once the oil cooler housing is removed?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Yes, in place of #6, shown here: http://bmwfans.info/parts/catalog/E30/T ... il_filter/ Oil filter then screws directly on the end.
-
tom325sport
- E30 Zone Regular

- Posts: 819
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Guernsey
So just to recap so I don't get it wrong...
Remove oil cooler housing, fit part 5 above, Then oil filter goes on this??
Remove oil cooler housing, fit part 5 above, Then oil filter goes on this??
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Correct, although I'm not 100% certain it's part #5 on that diagram, since I've only ever done this with the part removed from a scrap B20.
Can't think what #5 would be on the RH side of a M20 block though, if it isn't this.
Can't think what #5 would be on the RH side of a M20 block though, if it isn't this.
-
nickphine
- E30 Zone Regular

- Posts: 282
- Joined: Sun Dec 03, 2006 11:00 pm
- Location: Kendal
Its a double male adaptor, one end screws in to the block and the other into the standard oil filter, i got mine off a a scrap 320 and it was free because it fitted in my pocket!
