Oil Cooler m20

Need technical Q/A then you're in the right place

Moderator: martauto

tom325sport
E30 Zone Regular
E30 Zone Regular
Posts: 819
Joined: Tue Jan 11, 2005 11:00 pm
Location: Guernsey

Post Sat Oct 08, 2011 8:22 pm

Engine is out the car (M20 - 2.5) I won't be putting the oil cooler back on, what do I do with 2 holes where the 2 oil cooler pipes went near the oil filter?
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Sat Oct 08, 2011 8:30 pm

completely remove the oil cooler housing and fit the stub from the 320i
tom325sport
E30 Zone Regular
E30 Zone Regular
Posts: 819
Joined: Tue Jan 11, 2005 11:00 pm
Location: Guernsey

Post Sat Oct 08, 2011 8:51 pm

Yes the oil cooler is already off, sorry what do you mean the by the 'stub'? Thanks
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Sat Oct 08, 2011 8:54 pm

I have been trying to find it on real OEM but can't :( , they cost about £4 from the dealers,

it's basically what holds the filter to the M20 block on a 320i they don't use the cooler, and since the cooler housing is prone to leaking then it's the best option to remove it and fit the oil filter direct to the block
tom325sport
E30 Zone Regular
E30 Zone Regular
Posts: 819
Joined: Tue Jan 11, 2005 11:00 pm
Location: Guernsey

Post Sat Oct 08, 2011 9:07 pm

OK I see. I'll try and find it on OEM. Thanks
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Oct 08, 2011 9:14 pm

tom325sport
E30 Zone Regular
E30 Zone Regular
Posts: 819
Joined: Tue Jan 11, 2005 11:00 pm
Location: Guernsey

Post Sat Oct 08, 2011 9:22 pm

Thanks Brian. So number 5 shown goes into block once the oil cooler housing is removed?
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Oct 08, 2011 9:32 pm

Yes, in place of #6, shown here: http://bmwfans.info/parts/catalog/E30/T ... il_filter/ Oil filter then screws directly on the end.
tom325sport
E30 Zone Regular
E30 Zone Regular
Posts: 819
Joined: Tue Jan 11, 2005 11:00 pm
Location: Guernsey

Post Sat Oct 08, 2011 9:52 pm

So just to recap so I don't get it wrong...
Remove oil cooler housing, fit part 5 above, Then oil filter goes on this??
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Oct 08, 2011 9:58 pm

Correct, although I'm not 100% certain it's part #5 on that diagram, since I've only ever done this with the part removed from a scrap B20.
Can't think what #5 would be on the RH side of a M20 block though, if it isn't this.
nickphine
E30 Zone Regular
E30 Zone Regular
Posts: 282
Joined: Sun Dec 03, 2006 11:00 pm
Location: Kendal

Post Sat Oct 08, 2011 10:21 pm

Its a double male adaptor, one end screws in to the block and the other into the standard oil filter, i got mine off a a scrap 320 and it was free because it fitted in my pocket!