cheers!
tappets.. same old..same old...
Moderator: martauto
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
I'm sure you've heard it all before but I have a couple of rattly tappets.. very annoying
so I got my feeler gauges and some spanners and a brew and adjusted them (.25 cold) but still she rattles! now, I'm not an expert at adjusting tappets so I could have done it wrong or set them too wide.. can anyone recommend a garage or person that would do them on the south coast? (I'm in Brighton) because it's doing my pickle!
cheers!
cheers!

-
Jim320i
- E30 Zone News / COTM Team

- Posts: 10627
- Joined: Sun Oct 25, 2009 11:00 pm
- Location: Leicestershire
Might be your injectors that need cleaning Tom? Mines the same, always keep on top of my valve clearance yet she taps away all the time... Refurbed injectors will sort this... Injectortune will do these with zone discount too, think its a tenner each one.
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
ah but it's not my injectors! (although they are a bit ticky) its tappy tappy tappets! maybe I should just buy a noisy exhaust... 

-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Could just be that you have set the tappets OK,but that the cam is worn....
Youth is wasted on the young.
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
it wouldnt be a m20 if it didnt make a tap noise 
-
Grrrmachine
- E30 Zone Wiki / Team Member

- Posts: 8043
- Joined: Sat Feb 09, 2008 11:00 pm
- Location: Warsaw, Poland
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
Its not an M20 if it doesnt tick
E30 Crazy!
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
didn't I just say that lolAjsingh wrote:Its not an M20 if it doesnt tick
I've got a new cam and new rocker arms and mine still ticks
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
Lol yeah oops!
I like the tick, gives it more of the retro-ness
I like the tick, gives it more of the retro-ness
E30 Crazy!
-
fixedwheelnut
- E30 Zone Regular

- Posts: 909
- Joined: Sun Nov 20, 2005 11:00 pm
- Location: South East London
ross2009 wrote:didn't I just say that lolAjsingh wrote:Its not an M20 if it doesnt tick
I've got a new cam and new rocker arms and mine still ticks
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
well i can hear mine altho they are alot quiter than normal hence them being new you can still hear them
but then again how does every one know that they are ment to tick
has anybody bought a brand new e30 bk in the day did they tick then ???
but then again how does every one know that they are ment to tick
has anybody bought a brand new e30 bk in the day did they tick then ???
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
Mine runs great with no top end noise, and they didn't when they were new,
strangely they seem faster when Loose/tappity ?
strangely they seem faster when Loose/tappity ?
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
i didnt think they did its just a age and wear thing
might be a dam cant think of the word lol like a loud exhaust makes you think your going faster lol
might be a dam cant think of the word lol like a loud exhaust makes you think your going faster lol
-
mrb27
- E30 Zone Regular

- Posts: 345
- Joined: Wed Nov 17, 2010 11:00 pm
- Location: Essex
same as, i was thinking of giving the engine bay a little more sound proofing than normal, some foam beading along the bonnet edges and along the bulk head would probly make a big difference.
ofc you will always have the sound bouncing off the road but should still sound a little better
ofc you will always have the sound bouncing off the road but should still sound a little better
-
Tom_Maverick
- E30 Zone Camper

- Posts: 1343
- Joined: Wed Aug 25, 2010 11:00 pm
- Location: Brighton
yeah, the sad bit is I've got one that's louder than the rest.. guess I'll be having the top off again later then.. 

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
In that case, replace the worn bits! You won't set up a M20 correctly if there is any trace of wear on the eccentric discs.ross2009 wrote:i didnt think they did its just a age and wear thing
-
ross2009
- E30 Zone Addict

- Posts: 2762
- Joined: Mon Nov 19, 2007 11:00 pm
- Location: In my beemer MAN !!!! st neots CAMBS
it's not me. Brian all mine are new it's was Tom that was asking

