tappets.. same old..same old...

Need technical Q/A then you're in the right place

Moderator: martauto

Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Fri Oct 07, 2011 2:10 pm

I'm sure you've heard it all before but I have a couple of rattly tappets.. very annoying :x so I got my feeler gauges and some spanners and a brew and adjusted them (.25 cold) but still she rattles! now, I'm not an expert at adjusting tappets so I could have done it wrong or set them too wide.. can anyone recommend a garage or person that would do them on the south coast? (I'm in Brighton) because it's doing my pickle!

cheers! :wink:
Image
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Fri Oct 07, 2011 2:14 pm

Might be your injectors that need cleaning Tom? Mines the same, always keep on top of my valve clearance yet she taps away all the time... Refurbed injectors will sort this... Injectortune will do these with zone discount too, think its a tenner each one.
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Fri Oct 07, 2011 2:21 pm

ah but it's not my injectors! (although they are a bit ticky) its tappy tappy tappets! maybe I should just buy a noisy exhaust... :D
Image
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Fri Oct 07, 2011 2:58 pm

Could just be that you have set the tappets OK,but that the cam is worn....
Youth is wasted on the young.
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Fri Oct 07, 2011 10:18 pm

it wouldnt be a m20 if it didnt make a tap noise 8)
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Grrrmachine
E30 Zone Wiki / Team Member
E30 Zone Wiki / Team Member
Posts: 8043
Joined: Sat Feb 09, 2008 11:00 pm
Location: Warsaw, Poland

Post Fri Oct 07, 2011 10:34 pm

Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Sat Oct 08, 2011 5:36 am

Its not an M20 if it doesnt tick
E30 Crazy!
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sat Oct 08, 2011 6:53 am

Ajsingh wrote:Its not an M20 if it doesnt tick
didn't I just say that lol
I've got a new cam and new rocker arms and mine still ticks :)
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Sat Oct 08, 2011 3:57 pm

Lol yeah oops!

I like the tick, gives it more of the retro-ness
E30 Crazy!
User avatar
fixedwheelnut
E30 Zone Regular
E30 Zone Regular
Posts: 909
Joined: Sun Nov 20, 2005 11:00 pm
Location: South East London

Post Sat Oct 08, 2011 6:23 pm

ross2009 wrote:
Ajsingh wrote:Its not an M20 if it doesnt tick
didn't I just say that lol
I've got a new cam and new rocker arms and mine still ticks :)
:D If you can't hear them they are too tight :D
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sat Oct 08, 2011 6:31 pm

well i can hear mine altho they are alot quiter than normal hence them being new you can still hear them
but then again how does every one know that they are ment to tick
has anybody bought a brand new e30 bk in the day did they tick then ???
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Sat Oct 08, 2011 6:35 pm

Mine runs great with no top end noise, and they didn't when they were new,

strangely they seem faster when Loose/tappity ? :D
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sat Oct 08, 2011 6:37 pm

i didnt think they did its just a age and wear thing

might be a dam cant think of the word lol like a loud exhaust makes you think your going faster lol
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
mrb27
E30 Zone Regular
E30 Zone Regular
Posts: 345
Joined: Wed Nov 17, 2010 11:00 pm
Location: Essex

Post Sat Oct 08, 2011 7:25 pm

same as, i was thinking of giving the engine bay a little more sound proofing than normal, some foam beading along the bonnet edges and along the bulk head would probly make a big difference.

ofc you will always have the sound bouncing off the road but should still sound a little better :D
Tom_Maverick
E30 Zone Camper
E30 Zone Camper
Posts: 1343
Joined: Wed Aug 25, 2010 11:00 pm
Location: Brighton

Post Mon Oct 10, 2011 8:28 am

yeah, the sad bit is I've got one that's louder than the rest.. guess I'll be having the top off again later then.. :)
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Mon Oct 10, 2011 9:03 am

ross2009 wrote:i didnt think they did its just a age and wear thing
In that case, replace the worn bits! You won't set up a M20 correctly if there is any trace of wear on the eccentric discs.
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Mon Oct 10, 2011 9:22 am

it's not me. Brian all mine are new it's was Tom that was asking
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30