getting a flywheel lightend info?

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
wullie325i
CAUTION - unreliable trader!
Posts: 1398
Joined: Wed Jul 27, 2005 11:00 pm

Post Fri Sep 30, 2011 6:30 pm

hi

anyone have info and pics of where and how much should be taken off a m20 flywheel to fit onto an m52b28 engine.

buying a standard flywheel off a zoner so i will need to take it to a machine shop to have it done and would like to know whats what instead of taking some duffers word for it as its going in the wifes e39.

thanks in advance

wullie
User avatar
greggers
E30 Zone Newbie
E30 Zone Newbie
Posts: 135
Joined: Mon Jul 04, 2011 11:00 pm

Post Fri Sep 30, 2011 10:40 pm

Just had mine done. On the engine side there is a small step that you can machine down to.

Clutch side:
Image

Engine side:
Image

With any luck this is right, will let you know when I try and fit it to an M52 engine tomorrow.
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Fri Sep 30, 2011 11:26 pm

Greggers is right Wullie as mine was done the same area as his.
No mods needed to clear M50 sump either when using it in an E30.
Mine was lightened to 7kg but ive read of them being lighter still.
Image
User avatar
f22raptor1
E30 Zone Newbie
E30 Zone Newbie
Posts: 50
Joined: Wed May 11, 2011 11:00 pm

Post Sat Oct 01, 2011 8:49 am

is this worth doing with a standard m20 2.5 just curious??
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sat Oct 01, 2011 11:35 am

f22raptor1 wrote:is this worth doing with a standard m20 2.5 just curious??
As I understand this,the principle is that a lightened fly' will spin up quicker.
So the engine will gain RPM more quickly.Likewise,the engine will slow down more quickly,so you will spend more time with the throttle open...
Youth is wasted on the young.
Silverfang
E30 Zone Regular
E30 Zone Regular
Posts: 937
Joined: Fri Dec 23, 2005 11:00 pm
Location: Northampton

Post Sat Oct 01, 2011 3:03 pm

I had mine taken down to 6kg, having heard the limit is 5.8kg
Had it on an otherwise stock M20 (baring a ITG panel filter and Speedtouch chip) and it does make a real difference.
BMW and Opel, both RWD, both german, both good fun
http://www.clockservicing.co.uk/ For any clock repairs try here.