hi
anyone have info and pics of where and how much should be taken off a m20 flywheel to fit onto an m52b28 engine.
buying a standard flywheel off a zoner so i will need to take it to a machine shop to have it done and would like to know whats what instead of taking some duffers word for it as its going in the wifes e39.
thanks in advance
wullie
getting a flywheel lightend info?
Moderator: martauto
-
greggers
- E30 Zone Newbie

- Posts: 135
- Joined: Mon Jul 04, 2011 11:00 pm
Just had mine done. On the engine side there is a small step that you can machine down to.
Clutch side:

Engine side:

With any luck this is right, will let you know when I try and fit it to an M52 engine tomorrow.
Clutch side:

Engine side:

With any luck this is right, will let you know when I try and fit it to an M52 engine tomorrow.
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Greggers is right Wullie as mine was done the same area as his.
No mods needed to clear M50 sump either when using it in an E30.
Mine was lightened to 7kg but ive read of them being lighter still.
No mods needed to clear M50 sump either when using it in an E30.
Mine was lightened to 7kg but ive read of them being lighter still.

-
f22raptor1
- E30 Zone Newbie

- Posts: 50
- Joined: Wed May 11, 2011 11:00 pm
is this worth doing with a standard m20 2.5 just curious??
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
As I understand this,the principle is that a lightened fly' will spin up quicker.f22raptor1 wrote:is this worth doing with a standard m20 2.5 just curious??
So the engine will gain RPM more quickly.Likewise,the engine will slow down more quickly,so you will spend more time with the throttle open...
Youth is wasted on the young.
-
Silverfang
- E30 Zone Regular

- Posts: 937
- Joined: Fri Dec 23, 2005 11:00 pm
- Location: Northampton
I had mine taken down to 6kg, having heard the limit is 5.8kg
Had it on an otherwise stock M20 (baring a ITG panel filter and Speedtouch chip) and it does make a real difference.
Had it on an otherwise stock M20 (baring a ITG panel filter and Speedtouch chip) and it does make a real difference.
BMW and Opel, both RWD, both german, both good fun
http://www.clockservicing.co.uk/ For any clock repairs try here.
http://www.clockservicing.co.uk/ For any clock repairs try here.
