Temperature gauge doing strange things.
Moderator: martauto
-
ah
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Mar 10, 2008 11:00 pm
- Location: surrey
Before I start I have put a new a new sender unit on it about six months ago.When I turn the ignition on the needle sometimes cranks over to left of centre,but then it just touches the first line.Today I noticed the needle just touches the blue area,whats going on?
Born on the 23 April 1990 320i Alpinweiss ll kabriolett! (SOLD BUT NOT FORGOTTEN !)
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Tightened the small brass nut on the back of the cluster?
-
ah
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Mar 10, 2008 11:00 pm
- Location: surrey
Cheers Brian,do the nuts have to be brass as one was missing and Ive replaced it, but it was a steel nut.would this cause any problems.
Born on the 23 April 1990 320i Alpinweiss ll kabriolett! (SOLD BUT NOT FORGOTTEN !)
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Better than none. Should be OK unless it corrodes, and if you get corrosion in this area, then a temp. gauge problem is the least of your worries!
