swapping injectors?

Need technical Q/A then you're in the right place

Moderator: martauto

Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Sat Sep 24, 2011 6:46 pm

Is it better/easier to remove and refit the injectors while still attached to the fuel rail or first remove the rail and then do them one by one?
Image

E30 zone - promoting adult illiteracy since 2004
Jim320i
E30 Zone News / COTM Team
E30 Zone News / COTM Team
Posts: 10627
Joined: Sun Oct 25, 2009 11:00 pm
Location: Leicestershire

Post Sat Sep 24, 2011 9:30 pm

I would remove the rail first as you get more 'angle' when pulling them out, where as when they are still attached to the rail, you have limited movement :?

One of them jobs I keep putting off. 8O
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Sat Sep 24, 2011 9:36 pm

which ever way you choose just try to pull them out straight you don't want to leave a pintle cap behind :eek:

it makes the job easier if you spray wd40 towards the base of the injector where it goes into the inlet to lube the o ring that holds them in
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sun Sep 25, 2011 7:18 am

When you lift the fuel rail out,you will find that some injectors will come with it,and some will be left behind.

Fiddle the fuel rail out toward the front of the engine,it's easier if you dis-connect the temp sensors and remove the injector sub-loom first,take note of the way it threads through the manifold to C191.

The support bracket from the rocker cover to the inlet will need removing so that you can see what you are about,and the fuel rail is held by four 10mm bolts.

M20 injectors are a proper PITA to remove,M50 are a doddle by comparision!
Youth is wasted on the young.
Cloggy Saint
Old Skooler
Old Skooler
Posts: 8027
Joined: Sun Jan 09, 2005 11:00 pm
Location: zummerzet

Post Sun Sep 25, 2011 8:05 am

A proper PITA eh? Sounds like fun. Thanks for the info.
Image

E30 zone - promoting adult illiteracy since 2004
E30Gheko
E30 Zone Addict
E30 Zone Addict
Posts: 3789
Joined: Sun Sep 28, 2008 11:00 pm
Location: Wirral

Post Mon Sep 26, 2011 12:32 pm

I've done this a few times on M20's and always managed to remove the injectors still attached to the fuel rail. Once removed it's a doddle to swap them and then refit the whole thing.