Borg Warner Turbocharger deal £530 + shipping

[Gunni]

I´m offering a turbocharger that will fit most peoples turbocharging needs.

On a M20B25 this turbo came on full boost at about 3700-3900rpm (1.2bar boost) in most gears. It starts boosting very early on and provides excellent spool characteristics.

On a M50B25 is showed 0,2bar boost @ 1900rpm, 0,5bar @ 2600rpm in 3rd and above gears.

On a M50B28 it comes on full boost of 1bar at about 3500rpm.
Leaving you with half the rev range for a very wide torque curve

In both cases it´s making boost from early 2000rpm onwards

If used with a split pulse turbo manifold it will provide the best possible spool characteristics.

The inducer is 57mm on the compressor
The exducer is 65mm on the turbine

The compressor wheel has Borg Warners extended tip technology.

It has split pulse turbine housing

It has map width enhancement compressor cover

It is a non wastegated housing

I´d reccomend this turbocharger for M20/M30 and M50´s alike for anything between 300-500hp.

There is a 6week waiting period on the turbo from ordering, and what is why I can offer it at this reduced price.

This price is WITH VAT.

This is a 100% actual authenticated Borg Warner K27-7 Turbocharger

Some pics of installed turbo

[Ali786]

how much for this

[Gunni]

It says 530quid in the title.

that´s with VAT btw.

[E30_Crazy]

Gunni, I have heard of you being revered in the E30 FI scene. Do you have any kinda of ballpark figure on what to expect from an M20B25 with this setup? Or maybe a B27/B28 M20 build?

[Gunni]

It all depends on how hard you push the engine , if it has a forged bottom end or what.

Expect this turbo to be able to see you to 550hp depending on your engine setup,

A 2.7 or a 2.8 will not able to extract more power from this turbo but would come in earlier then on a 2.5

I´d use this turbo for anything between 320-550hp.

[Gunni]

So I´m about to order a few of these turbos.

Anybody want in right now?

[deepan]

are these still available? whats the best price on them?

[Gunni]

Same price and yes available.

[ross2009]

gunni i will be putting in a order for one of these in the new year as my turbo has just shit its self do you think youll have them in stock then or will there still be a 6 week waiting list ?

[craigieeb]

Dont think he has any of these left Ross mate,

Think he can get one of the ones i'v got tho



I think it's near enough the same turbo, but with different housings

[ross2009]

the spec on yours pretty much the same then ?

[craigieeb]

That A/R is a 1.22, while the new one is a 0.83 housing

Making it spool up a bit quicker

[ross2009]

when does yours start to spool ?

[craigieeb]

at the moment,
about erm..... I think around 3000 rpm?
mebbies sooner
I havnt driven it yet so cant say im 100% on that one


I'll know next weekend tho
(fingers crossed)

[ross2009]

hmmm mine made positive boost at around 2200 which is what i want again really

[craigieeb]

Like I say, I cant be 100% sure, it's only been on the rollers

it came off there, straight on the trailer, then on to the drive,
I had a little cheeky shot, while taking it off, but wasnt taking any notice of, anything really lol

I'v got to change the rear beam & trailing arms
It should be done by next weekend,
so I can tell you then what it's like fella

But chances are, you'll have a turbo sorted by then

[momomo]

Lad a tubo go on any e30 engine and whats spoon? Is that when the tubo kicks in?

[momomo]

Lad a tubo go on any e30 engine and whats spoon? Is that when the tubo kicks in?

[momomo]

Should say LADS!

[momomo]

Should say LADS!

[craigieeb]

whats spoon?

It's what you eat your soup with..

[ross2009]

whats spoon?

It's what you eat your soup with..

lmao

[Andyboy]

Or a shit E39 wheel!