rear oil seal gearbox m20

Need technical Q/A then you're in the right place

Moderator: martauto

ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sun Sep 18, 2011 8:58 am

guys how hard is it to do the rear oil seal on the getrag m20 gearbox ?

cheers
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Sep 18, 2011 9:58 am

Not particularly difficult, but two points to note:
1) The splines need sealant applied to them when you reassemble, or oil will leak along them, bypassing the seal.
2) Most rear gearbox seal 'leaks' are actually leaks from the small selector shaft seal directly above it.
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sun Sep 18, 2011 10:17 am

well bugger me Brian your right ive already got it up just went and had a look and in fact it I'd the selector shaft how easy are they to do?
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Sep 18, 2011 10:27 am

Access can be the main problem. Removing the rear crossmember and letting the back of the box drop a little helps.
Remove the linkage, slide the spring clip around the joint on the end of the selector shaft out of the way, push the pin out and remove the joint. Hook the seal out with a small screwdriver.
ross2009
E30 Zone Addict
E30 Zone Addict
Posts: 2762
Joined: Mon Nov 19, 2007 11:00 pm
Location: In my beemer MAN !!!! st neots CAMBS

Post Sun Sep 18, 2011 10:31 am

it's ok I've already done it lol I've only dropped the prop and took the linkage of job done but now where am I gonna get a new oil seal today :?
Turbo M20
Image
v8 project 6.0 twin turbo
http://s924.photobucket.com/user/Rossco ... ject%20e30