M20 inlet manifold question

Need technical Q/A then you're in the right place

Moderator: martauto

Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Wed Sep 14, 2011 9:27 pm

Can you put a 325i inlet and TB onto a 320i out of curiosity?

Anything else need to be changed if you do apart from a few of the obvious things?

Would it run right?

Cheers
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Wed Sep 14, 2011 9:36 pm

Cue the standard "fit the rest of the engine while you're at it" response :D
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Wed Sep 14, 2011 9:55 pm

It would fit, but u would have to trim the ports on the 731 head.

Iv heard on before that there is no real point and does not add really anymore performance or power... And its a fair bit of work for no gain... The b20 stroke is what is useless
E30 Crazy!
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Wed Sep 14, 2011 9:57 pm

capri_rob wrote:Cue the standard "fit the rest of the engine while you're at it" response :D
+1 :)
E30 Crazy!
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Wed Sep 14, 2011 10:18 pm

Thats fine and just interested if it made any odds like the M50 inlet mod
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
Ajsingh
E30 Zone Addict
E30 Zone Addict
Posts: 2378
Joined: Sun Mar 28, 2010 11:00 pm
Location: West Laaaandaan init! / Milton Keynes

Post Wed Sep 14, 2011 11:11 pm

Duke137 wrote:Thats fine and just interested if it made any odds like the M50 inlet mod
Believe me if it did, my car would not be a 2.7 right now lol
E30 Crazy!
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Thu Sep 15, 2011 8:45 am

The 320i responds well to a manifold swap and bigger throttle body - they're very strangled as they are. You need to lay a 325i manifold gasket on the head and using a die grinder, open out the shape of the ports. You will 101% need a remapped ECU though to get any benefit - 320i's are quite underfuelled as it is without any more air going in. It's a short stroke big bore engine that revs nicely. It'll never be fast as such but you can certainly make them better.

An easier alternative is to fit a 325i throttle body, but you need to do a pretty intense bit of grinding to open out the 320i manifold.
Duke137
Married to the E30 Zone
Married to the E30 Zone
Posts: 7207
Joined: Sat Aug 29, 2009 11:00 pm

Post Fri Sep 16, 2011 8:49 am

Andyboy wrote:The 320i responds well to a manifold swap and bigger throttle body - they're very strangled as they are. You need to lay a 325i manifold gasket on the head and using a die grinder, open out the shape of the ports. You will 101% need a remapped ECU though to get any benefit - 320i's are quite underfuelled as it is without any more air going in. It's a short stroke big bore engine that revs nicely. It'll never be fast as such but you can certainly make them better.

An easier alternative is to fit a 325i throttle body, but you need to do a pretty intense bit of grinding to open out the 320i manifold.
Sounds just as easy to drop a b25 engine in reality....

Cheers Andy
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.