Can you put a 325i inlet and TB onto a 320i out of curiosity?
Anything else need to be changed if you do apart from a few of the obvious things?
Would it run right?
Cheers
M20 inlet manifold question
Moderator: martauto
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Cue the standard "fit the rest of the engine while you're at it" response 

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
It would fit, but u would have to trim the ports on the 731 head.
Iv heard on before that there is no real point and does not add really anymore performance or power... And its a fair bit of work for no gain... The b20 stroke is what is useless
Iv heard on before that there is no real point and does not add really anymore performance or power... And its a fair bit of work for no gain... The b20 stroke is what is useless
E30 Crazy!
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
+1capri_rob wrote:Cue the standard "fit the rest of the engine while you're at it" response
E30 Crazy!
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Thats fine and just interested if it made any odds like the M50 inlet mod
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
-
Ajsingh
- E30 Zone Addict

- Posts: 2378
- Joined: Sun Mar 28, 2010 11:00 pm
- Location: West Laaaandaan init! / Milton Keynes
Believe me if it did, my car would not be a 2.7 right now lolDuke137 wrote:Thats fine and just interested if it made any odds like the M50 inlet mod
E30 Crazy!
-
Andyboy
- Alpina Colada
- Posts: 12577
- Joined: Mon Sep 11, 2006 11:00 pm
- Location: Notts
The 320i responds well to a manifold swap and bigger throttle body - they're very strangled as they are. You need to lay a 325i manifold gasket on the head and using a die grinder, open out the shape of the ports. You will 101% need a remapped ECU though to get any benefit - 320i's are quite underfuelled as it is without any more air going in. It's a short stroke big bore engine that revs nicely. It'll never be fast as such but you can certainly make them better.
An easier alternative is to fit a 325i throttle body, but you need to do a pretty intense bit of grinding to open out the 320i manifold.
An easier alternative is to fit a 325i throttle body, but you need to do a pretty intense bit of grinding to open out the 320i manifold.
-
Duke137
- Married to the E30 Zone

- Posts: 7207
- Joined: Sat Aug 29, 2009 11:00 pm
Sounds just as easy to drop a b25 engine in reality....Andyboy wrote:The 320i responds well to a manifold swap and bigger throttle body - they're very strangled as they are. You need to lay a 325i manifold gasket on the head and using a die grinder, open out the shape of the ports. You will 101% need a remapped ECU though to get any benefit - 320i's are quite underfuelled as it is without any more air going in. It's a short stroke big bore engine that revs nicely. It'll never be fast as such but you can certainly make them better.
An easier alternative is to fit a 325i throttle body, but you need to do a pretty intense bit of grinding to open out the 320i manifold.
Cheers Andy
How do you pronounce 'either'? I say 'either', but some say 'either'. Either is correct.
