Misfire

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
beemerstu84
E30 Zone Newbie
E30 Zone Newbie
Posts: 77
Joined: Sun Jan 01, 2006 11:00 pm
Location: East Kilbride, Glasgow

Post Wed Sep 07, 2011 9:34 pm

Hi there,

My 325 appears to have developed a misfire.

I pulled all the HT leads & found that the problem lies in the cylinder nearest the bulkhead.

I checked for a spark & all ok.
I then did a compression check - also ok, all about 150psi.

So am I right in thinking that it is a problem with the injector or could it be something else?

Any help would be appreciated.

Thanks
Stu
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Sep 08, 2011 10:55 am

Was the spark plug dry?

This would help confirm that the injector was playing up.

I can recommend 'Injectortune's' service,have a look in the Traders section.
Youth is wasted on the young.
User avatar
beemerstu84
E30 Zone Newbie
E30 Zone Newbie
Posts: 77
Joined: Sun Jan 01, 2006 11:00 pm
Location: East Kilbride, Glasgow

Post Thu Sep 08, 2011 12:18 pm

Yeah the plug nearest the bulkhead was dry.

I was hoping to take the dodgy injector out & fit a replacement at the same time.

Anyone have 1 that I can fit to make sure that is the fault before getting them all refurbished?

Thanks
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Sep 08, 2011 12:36 pm

Have you tried tapping the base of the injector whilst the engine is running?
Youth is wasted on the young.
cee
E30 Zone Regular
E30 Zone Regular
Posts: 983
Joined: Sun Aug 23, 2009 11:00 pm
Location: Plymouth

Post Thu Sep 08, 2011 1:32 pm

Not sure if this is relevant now but may be of some use;



Image
Image
1990 Sterlingsilber 318iS - 146 bhp / 192 Nm
User avatar
beemerstu84
E30 Zone Newbie
E30 Zone Newbie
Posts: 77
Joined: Sun Jan 01, 2006 11:00 pm
Location: East Kilbride, Glasgow

Post Thu Sep 08, 2011 5:44 pm

Just tried tapping the injector, no difference I'm afraid.

The plugs all looked normal according 2 that chart

Thanks

Stu
User avatar
beemerstu84
E30 Zone Newbie
E30 Zone Newbie
Posts: 77
Joined: Sun Jan 01, 2006 11:00 pm
Location: East Kilbride, Glasgow

Post Tue Sep 20, 2011 9:08 pm

Hi there, I finally got round to changing my injector to sort the misfire.

Success with the misfire however under load it still boggs down.

Just wondering if anyone has any other ideas what to try?

Thanks

Stu