Scorpion WARNING !

Need technical Q/A then you're in the right place

Moderator: martauto

bastosm3
E30 Zone Newbie
E30 Zone Newbie
Posts: 96
Joined: Mon Nov 24, 2008 11:00 pm
Location: Isle of Man

Post Tue Sep 06, 2011 7:41 pm

At the start of the year i decided to purchase a scorpion system for my 325is.

I contacted John at Roadrunner Motorsport, who was very helpful in explaining to me which system i needed and the size of the manifold/downpipe flange on the system.

I was informed that they had the downpipes and the rear box in stock, but they were waiting for the centre section to be made.

The system finally arrived in march, and i purchased all the neccesary fixing parts from my local bmw dealer.


Exactly 1 month after the system was fitted, this was the state of the centre section

Image

Image

I had a local material specialist look at the problem, as scorpion refused to replace under warranty because of the small scratches you can see underneath.

He told me that the failure was down to heat fatigue, the stainless that has been used to make the centre section was 0.75mm thick. He then welded the cracks for me, and then totally reskined the box for me using 1.5mm stainless.

After this the exhaust was working well, and sounding well, untill about 3 weeks ago.

When starting the car, the exhaust sounded well, and it sounded well at idle.

As soon as you put it under load, you could here it blowing, and then after that it would be noisey at idle.

So i put the car on the ramp at work, and came across this

Image

Image


At the rear of the centre box, both pipes, cracked all the way around !!!

What do you guys reckon ?

My conclusion is that the centre section has been rush built using the wrong materials !

Anyway, i'm stuck with this now, so i thought i'd warn other people. I certainly will not be buying anymore scorpion products.
Image
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Tue Sep 06, 2011 7:45 pm

you scraped the shit out of your centre box and you expect them to replace it under warrenty

not likely

the rear box, could be bad welding
e30topless
E30 Zone Team Member
E30 Zone Team Member
Posts: 13595
Joined: Wed Aug 23, 2006 11:00 pm
Location: surrounded by scrap

Post Tue Sep 06, 2011 7:46 pm

it's the same with a lot of stainless systems they crack, scorpion are well known for this especially newer one's, the last one I got from Roadrunner blew all of it's baffles out !

fritzbitz pipes also split,
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Tue Sep 06, 2011 7:51 pm

all scorpion systems blow their baffles out :D
bastosm3
E30 Zone Newbie
E30 Zone Newbie
Posts: 96
Joined: Mon Nov 24, 2008 11:00 pm
Location: Isle of Man

Post Tue Sep 06, 2011 7:53 pm

is there a decent quality centre section that will fit with the scorpion downpipes and back box ?
Image
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Tue Sep 06, 2011 7:54 pm

OEM
bastosm3
E30 Zone Newbie
E30 Zone Newbie
Posts: 96
Joined: Mon Nov 24, 2008 11:00 pm
Location: Isle of Man

Post Tue Sep 06, 2011 8:06 pm

any idea on a price for OEM ?

i still cant believe that this stainless system has only lasted 6-7 months,

thats nearly £100 a month !!
Image
suchy
True Zone Relic
Posts: 6604
Joined: Tue Apr 26, 2005 11:00 pm
Location: Portsmouth

Post Tue Sep 06, 2011 9:25 pm

My full Scorpion is coming up for its 7th birthday and I've never had a problem with it. Mine doesn't scrap it's arse along the road though...
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Tue Sep 06, 2011 10:34 pm

/\ mine does and it hasn't sh!t itself like that. I've had my centre box 7 years and my back box about 3. no problems. My centre box has alot more marks on it than yours too!

You've f**ked the centre box you can see that with the scrape marks. What are those dents? The back box could be a bad weld but i think your dragging scorpion down in an unfair fashion to me.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Sep 06, 2011 11:39 pm

It also depends how well its been fitted, if its been forced together the welds around the pipes/boxes will be under strain and will eventually crack.
bastosm3
E30 Zone Newbie
E30 Zone Newbie
Posts: 96
Joined: Mon Nov 24, 2008 11:00 pm
Location: Isle of Man

Post Tue Sep 06, 2011 11:52 pm

The scrapes arnt as bad as they may look, really only light scratches, it touched the top of speed bump round the corner of my brothers house about 3 or 4 times with 3 people in the car.

The dents are from stone chips off a freshly stone chipped road.

It's not the back box that's cracked round the pipes, its the back of the centre pipe, the box has cracked all the way around both pipes about 4mm outside of the welds.

What I can't understand is the thickness of the stainless, less than 1mm ?
The rest of the system seems much stronger and I've never had problems with scorpion systems in the past.
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Sep 06, 2011 11:55 pm

They have become really cheap and nasty, mine is a 2003 backbox and an earlier centre that was not used until I fitted it in 2005, apart from a crack around one of the tailpipe welds its been fine
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Tue Sep 06, 2011 11:57 pm

chinese steel :!: :idea: :?:
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Tue Sep 06, 2011 11:59 pm

I bellied a big dent in a scorpion years ago and it didnt crack 8O

They do crack easily at the welds though, as Dan said it depends how well its been fitted.
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Thu Sep 22, 2011 6:27 pm

Damn, I spoke too soon :cry:

This is what I found when I jacked my car up earlier, sounded like a joint had come apart the blow was that loud!
You can see ive just started to tack it back together

Image

Its been fine for probably 70k miles on a few different M50's M52's, it cant handle the Alpina though :(