I contacted John at Roadrunner Motorsport, who was very helpful in explaining to me which system i needed and the size of the manifold/downpipe flange on the system.
I was informed that they had the downpipes and the rear box in stock, but they were waiting for the centre section to be made.
The system finally arrived in march, and i purchased all the neccesary fixing parts from my local bmw dealer.
Exactly 1 month after the system was fitted, this was the state of the centre section


I had a local material specialist look at the problem, as scorpion refused to replace under warranty because of the small scratches you can see underneath.
He told me that the failure was down to heat fatigue, the stainless that has been used to make the centre section was 0.75mm thick. He then welded the cracks for me, and then totally reskined the box for me using 1.5mm stainless.
After this the exhaust was working well, and sounding well, untill about 3 weeks ago.
When starting the car, the exhaust sounded well, and it sounded well at idle.
As soon as you put it under load, you could here it blowing, and then after that it would be noisey at idle.
So i put the car on the ramp at work, and came across this


At the rear of the centre box, both pipes, cracked all the way around !!!
What do you guys reckon ?
My conclusion is that the centre section has been rush built using the wrong materials !
Anyway, i'm stuck with this now, so i thought i'd warn other people. I certainly will not be buying anymore scorpion products.





