Fuel hose

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
rover-2000
E30 Zone Newbie
E30 Zone Newbie
Posts: 226
Joined: Thu Aug 25, 2011 11:00 pm
Location: Walsall

Post Sun Aug 28, 2011 10:46 am

Guys
Just noticed that the fuel hose which joins the fuel rail and drops down towards the back of the bay is cracked and perished, so needs replacing. Does anyone know offhand what size hose I need to get and an approximate length?
Many thanks.
Kind regards
John

1989 320i Touring
1993 E34 525i SE Touring
1979 Porsche 924 Lux
1982 Porsche 924 Lux
1985 Porsche 944 Lux
nickphine
E30 Zone Regular
E30 Zone Regular
Posts: 282
Joined: Sun Dec 03, 2006 11:00 pm
Location: Kendal

Post Sun Aug 28, 2011 12:49 pm

Think it's 8mm internal diameter, make sure you put a rag over the end as you pull it off so it doesn't spray petrol into your eyes.
nickphine
E30 Zone Regular
E30 Zone Regular
Posts: 282
Joined: Sun Dec 03, 2006 11:00 pm
Location: Kendal

Post Sun Aug 28, 2011 12:50 pm

Think it's 8mm internal diameter, make sure you put a rag over the end as you pull it off so it doesn't spray petrol into your eyes.
capri_rob
Married to the E30 Zone
Married to the E30 Zone
Posts: 9678
Joined: Tue Feb 19, 2008 11:00 pm
Location: South Staffordshire

Post Sun Aug 28, 2011 4:45 pm

Yep 8mm internal diameter - make sure it says "Unleaded OK" or words to that effect printed on it.
Image

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
User avatar
rover-2000
E30 Zone Newbie
E30 Zone Newbie
Posts: 226
Joined: Thu Aug 25, 2011 11:00 pm
Location: Walsall

Post Sun Aug 28, 2011 5:39 pm

Thanks guys. The stuff on there now is severely cracked-probably because it's air hose...... :o
Kind regards
John

1989 320i Touring
1993 E34 525i SE Touring
1979 Porsche 924 Lux
1982 Porsche 924 Lux
1985 Porsche 944 Lux
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun Aug 28, 2011 10:24 pm

Start the engine and then pull out the fuel pump fuse, #11, 7.5A. The engine will stop after a second or two, and there will be no residual pressure in the hose to spray fuel over you. Switch off the ignition, and replace the fuse.
Make sure the hose is suitable for high pressure, and not intended for carb. engines.