Guys
Just noticed that the fuel hose which joins the fuel rail and drops down towards the back of the bay is cracked and perished, so needs replacing. Does anyone know offhand what size hose I need to get and an approximate length?
Many thanks.
Fuel hose
Moderator: martauto
-
rover-2000
- E30 Zone Newbie

- Posts: 226
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: Walsall
Kind regards
John
1989 320i Touring
1993 E34 525i SE Touring
1979 Porsche 924 Lux
1982 Porsche 924 Lux
1985 Porsche 944 Lux
John
1989 320i Touring
1993 E34 525i SE Touring
1979 Porsche 924 Lux
1982 Porsche 924 Lux
1985 Porsche 944 Lux
-
nickphine
- E30 Zone Regular

- Posts: 282
- Joined: Sun Dec 03, 2006 11:00 pm
- Location: Kendal
Think it's 8mm internal diameter, make sure you put a rag over the end as you pull it off so it doesn't spray petrol into your eyes.
-
nickphine
- E30 Zone Regular

- Posts: 282
- Joined: Sun Dec 03, 2006 11:00 pm
- Location: Kendal
Think it's 8mm internal diameter, make sure you put a rag over the end as you pull it off so it doesn't spray petrol into your eyes.
-
capri_rob
- Married to the E30 Zone

- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Yep 8mm internal diameter - make sure it says "Unleaded OK" or words to that effect printed on it.

e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
rover-2000
- E30 Zone Newbie

- Posts: 226
- Joined: Thu Aug 25, 2011 11:00 pm
- Location: Walsall
Thanks guys. The stuff on there now is severely cracked-probably because it's air hose...... 
Kind regards
John
1989 320i Touring
1993 E34 525i SE Touring
1979 Porsche 924 Lux
1982 Porsche 924 Lux
1985 Porsche 944 Lux
John
1989 320i Touring
1993 E34 525i SE Touring
1979 Porsche 924 Lux
1982 Porsche 924 Lux
1985 Porsche 944 Lux
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Start the engine and then pull out the fuel pump fuse, #11, 7.5A. The engine will stop after a second or two, and there will be no residual pressure in the hose to spray fuel over you. Switch off the ignition, and replace the fuse.
Make sure the hose is suitable for high pressure, and not intended for carb. engines.
Make sure the hose is suitable for high pressure, and not intended for carb. engines.
