coilover coil dislocation and MOT
Moderator: martauto
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
Am i right in thinking MOT blokey will fail me for spring dislocation on coilovers? Seem to remember reading that somewhere.
If so has anyone got a supplier of some helper springs? Seems it's Faulkners or Faulkners from a quick search.
If so has anyone got a supplier of some helper springs? Seems it's Faulkners or Faulkners from a quick search.

'88 e30 328i M52 track bint.
-
HairyScreech
- Engaged to the E30 Zone

- Posts: 6265
- Joined: Sun Jan 21, 2007 11:00 pm
could you not wind your coil overs up? i know it would give a daft ride height, but its only a case of winding them back down again.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
I thought of that but I'm not sure they will go high enough, the rears in particular dislocate by a long way. I will probably put them up anyway to stop any car/ramp interaction so I might have a play tomorrow.

'88 e30 328i M52 track bint.
-
320Touring
- E30 Zone Team Member

- Posts: 12316
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Glasgow (Scotland)
Cable ties FTMFW!
Failing that, helper springs as you say.. or just refit stock rear dampers/springs?
Failing that, helper springs as you say.. or just refit stock rear dampers/springs?
The big Unit Parts Clear out Make me an offer on parts!
http://www.e30zone.net/modules.php?name ... 81#2766881
http://www.e30zone.net/modules.php?name ... 81#2766881
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
Standard stuff is currently suspending Jakes touring so no chance of that. Cables ties though....hmmm....or perhaps some duct tape. 

'88 e30 328i M52 track bint.
-
shedrool83
- Old Skooler

- Posts: 4395
- Joined: Thu May 10, 2007 11:00 pm
- Location: Dundee Scotland
-
Prey
- E30 Zone Regular

- Posts: 359
- Joined: Tue Jun 15, 2010 11:00 pm
- Location: M1 J28
it shouldn't fail the mot on a spring dislocating - only if it doesn't relocate on its own iirc.
-
bmwbmwbmw
- E30 Zone Regular

- Posts: 429
- Joined: Sat Jan 15, 2011 11:00 pm
my brothers e30 passed the mot with his coilovers on
89' e30 cabby (road project)
89' mazda 323 turbo 4x4 bf (road project)
89' mazda 323 turbo 4x4 bf (died, it still has its place in my hart) im really sorry for abusing you, please forgive me
99' 525i sport manual with m5 bits (daily driver)
89' mazda 323 turbo 4x4 bf (road project)
89' mazda 323 turbo 4x4 bf (died, it still has its place in my hart) im really sorry for abusing you, please forgive me
99' 525i sport manual with m5 bits (daily driver)
-
aceifty
- E30 Zone Regular

- Posts: 866
- Joined: Mon Jan 26, 2009 11:00 pm
- Location: never you mind
iv got coilovers on my cab and it passed the MOT, was told it is a bit to low but still ok cuz the cab is sitting on coilovers.
1989 cab M20B28 build
http://www.e30zone.net/modules.php?name ... highlight=
http://www.e30zone.net/modules.php?name ... highlight=
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
If the spring noticeably falls out it will fail, I doubt a keen eyed tester would pass it with cable ties holding the spring in. E36 dampers are longer BTW, so the spring will drop more.
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
OK it's only the rears that do it so I'll order some helpers and adaptors and do it properly.
Next thing I'm wondering if it will get on the fecking ramp as the front springs are too short meaning it has very little adjustment, it's pretty fecking low and it's wound right up to the top of the thread.
Next thing I'm wondering if it will get on the fecking ramp as the front springs are too short meaning it has very little adjustment, it's pretty fecking low and it's wound right up to the top of the thread.

'88 e30 328i M52 track bint.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
You could pack out the rears with some extra rubber pads if its not that much of a gap
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
It's not using the balloon springs now Dan, it's coilover on the rears now too. It's exactly 2" of a gap at its current ride height so a couple of 2" helpers and the adaptor thingy should sort it, I'm guessing they are 2.25" springs, doubt 2.5's would fit on an e30.

'88 e30 328i M52 track bint.
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Sounds counciltastic ! 
-
nickso
- E30 Zone Addict

- Posts: 4396
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: Go do that voodoo that you do so welllllllll!!
Extremely Pete. I'll probably have it down in Englandshire one summer so you can take the pish with no mercy. 

'88 e30 328i M52 track bint.

