M52 b30 stroker rebuild back on the road
Moderator: martauto
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
3.64 is a good ratio for an E30 gearbox mate, the dude with the M52 must be using the ZF gearbox from an E36
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Beat me to it.E30BeemerLad wrote:3.64 is a good ratio for an E30 gearbox mate, the dude with the M52 must be using the ZF gearbox from an E36

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
what box has topless got he tops out at 125 aswell with 3.73 diff.E30BeemerLad wrote:3.64 is a good ratio for an E30 gearbox mate, the dude with the M52 must be using the ZF gearbox from an E36
i could do 125mph in a mineral blue 318i m40

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
e30topless
- E30 Zone Team Member

- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
mines a dirty 6 box Mick ,
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i see said the blind man...
so anyone used am m40 box with 3.64 diff in e30 24v land?
will be same ratio or close to an m42 i'd say,
so anyone used am m40 box with 3.64 diff in e30 24v land?
will be same ratio or close to an m42 i'd say,

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
i used an m40 box with a 3.64 diff with my m50.

-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
what was the top end cook my good man?

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
DanThe
- E30 Zone Team Member

- Posts: 28646
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Indeedy, my 3.38 with E36 328i box tops out at 130mphE30BeemerLad wrote:3.64 is a good ratio for an E30 gearbox mate, the dude with the M52 must be using the ZF gearbox from an E36
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
i never maxed it out mick, i think the theoretical top speed is something like 145-150 but it might be worth double checking with an online gear ratio calculator.
the 3.64 wasn't half bad at all, a good diff for decent acceleration and a top speed.
the 3.64 wasn't half bad at all, a good diff for decent acceleration and a top speed.

-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
sounds a good bundle to me


m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
it will definately be useable though with an m40 box. If you did want more acceleration though its not the end of the world becuase at least you can still use it for the meantime and im sure you're used to removing diffs by now with all your fragging experience 

-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
i was hoping on the lightened flywheel and a chip for that.
the 3.64 is an open one so it's only a temp measure.if i like then an lsd is next so i might see if steve will sell his 3.73 lsd if i need more acceleration.
the 3.64 is an open one so it's only a temp measure.if i like then an lsd is next so i might see if steve will sell his 3.73 lsd if i need more acceleration.

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
e30topless
- E30 Zone Team Member

- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
my 3.37 is an open diff Mick, thinking about getting it welded though ,
I have accuired a 3.25 LSD will be using that
I have accuired a 3.25 LSD will be using that
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Stop it![/img]e30topless wrote:my 3.37 is an open diff Mick, thinking about getting it welded though ,![]()

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
welded diffs are shite on a daily drive 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
DO IT!!!e30topless wrote:my 3.37 is an open diff Mick, thinking about getting it welded though ,![]()

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
e30topless
- E30 Zone Team Member

- Posts: 13598
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
Fook thatRav335uk wrote:DO IT!!!e30topless wrote:my 3.37 is an open diff Mick, thinking about getting it welded though ,![]()
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
just to clarify before i spend,to fit the m40 box i need a 320i prop and gear linkage.
will a 325i prop be no good as i have one of those?
will a 325i prop be no good as i have one of those?

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
I'm using a 325 prop, but M42 box, not sure if the dimensions of the M40 & M42 boxes are different
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
m40 and m42 box are the same except m42 box has synchro on reverse.
you want 320 linkage and 325 prop the 320 is slightly shorter and needs a couple of spacers putting in.
I used an m42 box on my cars and a 3.64 diff which was good for an indicated 160mph so real world 145 to 155 somewhere?
Compacts have some good diff ratio's which are a touch longer for that motorway work. All are small cases though and from experience I chewed through small case stuff in 4-5 months
you want 320 linkage and 325 prop the 320 is slightly shorter and needs a couple of spacers putting in.
I used an m42 box on my cars and a 3.64 diff which was good for an indicated 160mph so real world 145 to 155 somewhere?
Compacts have some good diff ratio's which are a touch longer for that motorway work. All are small cases though and from experience I chewed through small case stuff in 4-5 months
Bollocks to this 24v scrap!
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
thanks for your input Bob 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
you've moved north and you've swayed to the dark side of 6cyl's, your alright i suppose ;)
if your non vanos buy dezzy's cams
if your non vanos buy dezzy's cams
Bollocks to this 24v scrap!
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Dezzys cams are long gone Bob S52's are now with our Dan awaiting the re build. 

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
Bob_S
- Engaged to the E30 Zone

- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
ahh cool didnt know you'd sold them.
Going to see Daniel tomorrow to get some fresh scrap
said he'd sent the block off to be "chemically cleaned" in his accent 
Going to see Daniel tomorrow to get some fresh scrap
Bollocks to this 24v scrap!
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
It's back mate. Pics on my thread.
Can't wait to get it back now.
Can't wait to get it back now.

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
one step @ a time Bob ffs! 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
appletree
- E30 Zone Addict

- Posts: 3482
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
I'm not sure that the M40 and M42 boxes are the same rix313 had some real trouble getting his box and propshaft to fit and then found out it was an M40 box not an M42 and had to buy a new box.
I'll see if I can find it on his thread
I'll see if I can find it on his thread

You should never underestimate the predictability of stupidity
M42 Supercharged 285bhp + M3 6speed box
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
M42 box is slightly bigger than the M40
M42 box = 325 prop
M40 box = 320 prop
I had an M40 and 320 prop combo and it was perfect with a 320 gearselector bracket
M42 box = 325 prop
M40 box = 320 prop
I had an M40 and 320 prop combo and it was perfect with a 320 gearselector bracket
Last edited by Dezzy on Sat Oct 16, 2010 3:41 pm, edited 1 time in total.

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
320i prop and full 320i linkage is now ordered,cheers lads


m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Dezzy
- CR24v it's a lifestyle
- Posts: 11974
- Joined: Thu May 15, 2008 11:00 pm
- Location: Middlesbrough
Glad your sorted mate.

Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
-
leeparkes
- Married to the E30 Zone

- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Any updates Mick?
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
only this lee,



some council activity courtesy of sweep
got the 12 mth mot so sorned at the end of month for a refurb




some council activity courtesy of sweep
got the 12 mth mot so sorned at the end of month for a refurb

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
leeparkes
- Married to the E30 Zone

- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
Felix79
- All loved up !
- Posts: 5134
- Joined: Sat May 24, 2008 11:00 pm
- Location: Hereford
Scorpion LeMans?
Felix79 aka Dan
If you got haters, then your doing something right!
E85 Z4M Roadster
If you got haters, then your doing something right!
E85 Z4M Roadster
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
not quite but similarFelix79 wrote:Scorpion LeMans?

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
