brake dust
Moderator: martauto
-
nm1
- E30 Zone Regular

- Posts: 318
- Joined: Sat Jan 05, 2008 11:00 pm
- Location: ireland
is there anything i can do to reduce brake dust sticking to my wheels, if you drive around 30 miles in a day the front wheels have went from shiny silver to gunmetal grey. i know this is not the end of the world but id love to know if there is anything you can put on the wheels to reduce brake dust. i was thinking of a parachute on the back like the drag cars 

-
silversideofthemoon
- E30 Zone Regular

- Posts: 498
- Joined: Sat May 29, 2010 11:00 pm
- Location: near a river in the north west
i used green stuff pads think they were called, reduces the colouring of dust alot but then i clean my motor every week so doenst bother me that much now to much time on my hands i guess ,but there are pads on the market that reduce the amount or colouring that the wheels pick up 
formally touringandy.............driving e30 320i touring and e39 535i
-
poolnoodle
- E30 Zone Squatter

- Posts: 1785
- Joined: Sat May 24, 2008 11:00 pm
- Location: Hobart, Tasmania, Australia
A couple of options:
- BMW pads are bad for dust, try a different brand
- wax the wheels with panel or wheel wax and the dust comes off easily with a damp cloth
- BMW pads are bad for dust, try a different brand
- wax the wheels with panel or wheel wax and the dust comes off easily with a damp cloth
'83 Bronzit 323i (mmmm, chrome)
'74 Polaris 2002 (mmmm, retro)
'89 Delphin 535i (mmmm, waft waft)
'74 Polaris 2002 (mmmm, retro)
'89 Delphin 535i (mmmm, waft waft)
-
nm1
- E30 Zone Regular

- Posts: 318
- Joined: Sat Jan 05, 2008 11:00 pm
- Location: ireland
thanks poolnoodle i give it a go

-
PG325
- E30 Zone Camper

- Posts: 1194
- Joined: Sat Jun 06, 2009 11:00 pm
I'd second coating the wheels in a specific wheel wax or something like Autoglym resin polish, did this on my BBS and the dust just washes off with the jet wash.
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Auto Glym resin polish is not a protecting product, its a polish, you need to go over it with either wax or sealant.
I use Poorboys wheel sealant, I gave my wheels 2 coats after cleaning them properly inside and out last year, the dust comes off easy with wash/wax water on a cloth
I use Poorboys wheel sealant, I gave my wheels 2 coats after cleaning them properly inside and out last year, the dust comes off easy with wash/wax water on a cloth
-
Bluto
- E30 Zone Newbie

- Posts: 247
- Joined: Fri Dec 04, 2009 11:00 pm
- Location: NW
fk1000p massive tin, ideal for car and alloys.
