m50 info please

Post Thu May 06, 2010 9:32 am

Ah right.

Isn't one side meant to be hex shaped due to one being in tension and the other in compression? May be wrong mind...

Post Thu May 06, 2010 9:35 am

No, its a myth, check the parts catalogue and you will see the mount was fitted in pairs and with a square mount depending on vehicle, the square mounts were also fitted in pairs on some cars

Post Thu May 06, 2010 3:56 pm

if i brought everythnig to do the conversion is there anyone that will but it in to a car for me,
if so what sort of cost would that be.

The only reason i ask is that i might be going down a different route with the cars.

Post Thu May 06, 2010 5:12 pm

price depends on how much of a hurry your in, as it would be a pj!!!

Post Thu May 06, 2010 8:02 pm

it dont inclued auy of the m50 engine and stuff.

Post Thu May 06, 2010 10:50 pm

I hope your not planning on going to the dark side as in the M30's

Post Thu May 06, 2010 10:56 pm

Go for it Baz, over from the Darkside to the Good side

Post Fri May 07, 2010 12:07 am

town325i wrote:I hope your not planning on going to the dark side as in the M30's

If he does, he is clearly a raving homo..

Post Fri May 07, 2010 9:30 am

Jhonno wrote:
town325i wrote:I hope your not planning on going to the dark side as in the M30's
If he does, he is clearly a raving homo..

If he does Rav will be bumming him a treat

Post Fri May 07, 2010 10:21 am

town325i wrote:
Jhonno wrote:
town325i wrote:I hope your not planning on going to the dark side as in the M30's
If he does, he is clearly a raving homo..
If he does Rav will be bumming him a treat

Fook, you think too much

Post Fri May 07, 2010 10:28 am

Rav i have to do something while im not working

Post Fri May 07, 2010 11:04 am

No ladies i`m not going m30 i`m staying with the m50 Penton is talking about something completely different, in time i shell reveal all.

All can someone confirm i need the dipstick and tube from the e34 m50 ??

Post Fri May 07, 2010 11:50 am

Yes, and the sump.

Post Fri May 07, 2010 12:10 pm

Nice 1 Ross thanks

Post Sun May 09, 2010 11:18 pm

can someone help me with the part number for the oil pickup i need.

Cheers

Post Sun May 09, 2010 11:20 pm

Baz666 wrote:can someone help me with the part number for the oil pickup i need.

Cheers

NO!!

Post Sun May 09, 2010 11:23 pm

BITCH

Man that text you send me

Post Sun May 09, 2010 11:25 pm

Now i'm defo not helping you, SLAG!

Post Mon May 10, 2010 11:29 am

anyone know as i need to order asap

Post Mon May 10, 2010 5:08 pm

You need these part numbers 11411748150 11411703947 the first one is the pick up pipe and the second one is the gasket

Post Mon May 10, 2010 5:18 pm

sorted dude ordered them today. thanks town

Post Sat May 15, 2010 2:13 pm

I`v been told as my touring as abs i`v got to look for a air filter is there any other options other than some sort of k&n filter as i bloody hate them. but if i have to as anyone tryed the stealth air filters from Vogue Automotive ?? or should i just get a K&N.

Post Sat May 15, 2010 2:30 pm

Baz666 wrote:I`v been told as my touring as abs i`v got to look for a air filter is there any other options other than some sort of k&n filter as i bloody hate them. but if i have to as anyone tryed the stealth air filters from Vogue Automotive ?? or should i just get a K&N.

http://www.e30zone.net/modules.php?name ... c&t=169127
Same as I have on mine.

Post Sat May 15, 2010 3:40 pm

Thanks Brian so with abs i need the m30 box better start looking for one then.

Post Mon May 17, 2010 12:25 pm

right can someone give me the info on ECU`s as i`v just been told i got the wrong one and need to know which one to get. sigal vanso none ews ecu ??? i think i need.

if anyone could give me the numbers of the ecu i know what to look for.

Post Mon May 17, 2010 4:40 pm

What numbers has your ecu got on it?

Post Mon May 17, 2010 4:57 pm

0 261 200 413 is the ecu you need, should have a red label.

Post Mon May 17, 2010 6:49 pm

shameless plug, I have a red label ecu if you are interested, pm me.

Post Tue May 18, 2010 12:35 am

baptie0 wrote:shameless plug, I have a red label ecu if you are interested, pm me.

Pm`ed you fella and replyed to you in the wanted section if it`s the number i need stated in the above thread then i have it.

also if someone else can confirm that thats the number ecu i need then all`s good.

Post Tue May 18, 2010 8:36 am

413 with a maroon label is the correct ECU for a M50B25 with vanos.
Label colour is important - a silver labelled 413 has EWS.

Post Tue May 18, 2010 11:31 am

Thanks again Guys, the silver labelled one was the one i had, i really thought it was going to be hard to find one top man baptie0

Post Thu May 20, 2010 4:28 pm

http://www.e30zone.net/modules.php?name ... c&t=166678

well it`s in

Post Thu May 27, 2010 12:10 pm

With my m50 all most done could someone tell me what would the best lcd diff to use something that would give me a better performance.

Post Thu May 27, 2010 12:53 pm

What box are you using Baz? If its an iS box then id opt for a 3.91 with an M50B25

Post Thu May 27, 2010 1:00 pm

Thanks Dan got the link fella be in later, yeah i`m useing a iS box i`v got my sport diff but was going to look for another one for better performance.