Sounds NiceCook318IS wrote:Trust me, i have the correct doorcardsThey will go on when i put speakers in the parcel shelf, a previous owner has put some huge JVC speakers in the current rear doorcards
Cooks m52 316i - going S54!
Moderator: martauto
-
Alex
- Married to the E30 Zone

- Posts: 22666
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
Oh it is



-
Alex
- Married to the E30 Zone

- Posts: 22666
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
Someone has done that in my cabby rear door cards (the bit that clips out fortunatly), cut them to put the same size speaker as what goes behind the trim panel
cant see it being easy to get another blue set either
Might just have to find some plain grill speakers to fit 
cant see it being easy to get another blue set either
Last edited by Alex on Fri May 07, 2010 6:11 pm, edited 1 time in total.
-
DanThe
- E30 Zone Team Member

- Posts: 28646
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Dont suppose eko took the clutch apart when he had the box out? The only explanation I can think of is the diaphram spring is being pushed into the clutch plate. You could always space the slave backwards
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
I dont know if he did actually. If the clutch stop works fine i'll be happy enough. Taking the gearbox out again wouldn't be something i'd want to do in the near future.

-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
I've just taken the car down the road and there is clutch judder now when pulling away 

-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
Jai has had exactly the same clutch issues you have! Same box, but B32, and JB Racing flywheel.. I don't get it and neither does he. To me it seems like it is being pressed too far
How bad was the judder? I get some every now and then in my snotter, but not all the time - only occasionally when cold, so it doesn't fuss me..
How bad was the judder? I get some every now and then in my snotter, but not all the time - only occasionally when cold, so it doesn't fuss me..
-
Alex
- Married to the E30 Zone

- Posts: 22666
- Joined: Fri Feb 11, 2005 11:00 pm
- Location: Johannesburg, South Africa
i get that in my IS when cold sometimes, so does my mum in her compactCook318IS wrote:I've just taken the car down the road and there is clutch judder now when pulling away
what usually causes it?
-
Blitz
- Married to the E30 Zone

- Posts: 11155
- Joined: Mon Jan 30, 2006 11:00 pm
- Location: East London+Basildon
Same here but the 318ci.Alex wrote:i get that in my IS when cold sometimes, so does my mum in her compactCook318IS wrote:I've just taken the car down the road and there is clutch judder now when pulling away
what usually causes it?
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
It's been dynoed - have a guess what it's running 
-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
210
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
Remember it's got the m52 manifold on still and it has an induction kit

-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
I thought you had the M50 inlet manifold?
well 200 then
well 200 then
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
197 ?

-
Jhonno
- Homo Hair
- Posts: 20362
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: FLAT, FLAT, FLAT!!
198
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
197.5 
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
gareth
- E30 Zone Team Member

- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
150 at the spare wheel 
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Blitz
- Married to the E30 Zone

- Posts: 11155
- Joined: Mon Jan 30, 2006 11:00 pm
- Location: East London+Basildon
-193+386
-
stup86
- E30 Zone Regular

- Posts: 485
- Joined: Mon Oct 05, 2009 11:00 pm
- Location: Clevedon, Near Bristol
189?
Parts needed:
M40/M20 ignition coil with high voltage lead
M40/M20 ignition coil with high voltage lead
-
leeparkes
- Married to the E30 Zone

- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
196
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
Judder has completly gone again
maybe its me.
One of you is fairly close so far
I have a video and a few photos to upload and then all shall be revealed 
One of you is fairly close so far

-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Cant get my head round this clutch noise at all?
Dissappears for a week or so then raises its ugly head again
Clutch wasnt inspected or removed when I retook the box out but looked in as new condition when first fitting the M52.
Paul as said on the phone I reckon just put a clutch stop under the pedal....no more a bodge then boring holes in gearboxs
Any before/after comparisons of any of the other cars on the rolling road to confirm its still pretty accurate from lat time?
Does have a good reputation though!
Chris is over the moon,at least he hasnt cost you power
Dissappears for a week or so then raises its ugly head again
Clutch wasnt inspected or removed when I retook the box out but looked in as new condition when first fitting the M52.
Paul as said on the phone I reckon just put a clutch stop under the pedal....no more a bodge then boring holes in gearboxs
Any before/after comparisons of any of the other cars on the rolling road to confirm its still pretty accurate from lat time?
Does have a good reputation though!
Chris is over the moon,at least he hasnt cost you power

-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
I think everybody who ran has actually modified their cars since the last time actually, i'll have to double check - but as i've said before this place is renown as being pretty accurate!

-
E30BeemerLad
- Married to the E30 Zone

- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
203bhp and 220ft/lb of torque is a nice result for a bone stock setup other than a cone filter.
Nice one
Nice one
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
Aye! He remembered how disappointed i was last time i went with the m50. When he had this huge smile on his face and i looked at the screen it said 200bhp. another run - 201bhp, then 202 until it hit the peak of 203.2bhpE30BeemerLad wrote:203bhp and 220ft/lb of torque is a nice result for a bone stock setup other than a cone filter.
Nice one
Not bad for a £40 engine eh?

-
leeparkes
- Married to the E30 Zone

- Posts: 9538
- Joined: Thu Jan 03, 2008 11:00 pm
- Location: Black country
Good result 
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place..
-
gareth
- E30 Zone Team Member

- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
not bad at all
for a little engine
for a little engine
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
there was an m30 there actually - e34 535i. tachometer stopped reading at 300k miles about 4 mots ago and it made about 218bhp iirc 

-
gareth
- E30 Zone Team Member

- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
M30 FTW 
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Should respond well to the M50 mani swap 

-
DanThe
- E30 Zone Team Member

- Posts: 28646
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Much higher than expected!
-
gareth
- E30 Zone Team Member

- Posts: 11009
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
that'll be the 24 posh helium filled valves!DanThe wrote:Much higher than expected!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Cook318IS
- E30 Zone Addict

- Posts: 4587
- Joined: Fri Jun 08, 2007 11:00 pm
- Location: Torquay
so that is why my ride height is so highgareth wrote:that'll be the 24 posh helium filled valves!DanThe wrote:Much higher than expected!








