Quick release bumpers

[ross_jsy]

I have seen a few cars with bonnet pins holding the bumpers/body kit on. just wondering how people have done this and if anyone has pics of a tec2 kit like this it would be much appreciated

cheers,

ross

[leeparkes]

You can get e30 bumpers off fairly quick anyway if the bolts are just nipped up tight,

Undo two bolts and it will slide off, in under a minute i reckon.

[MillRat]

What, like this?













With 2 people, the splitter comes off in 1 minute, 2 minutes if doing by yourself..

[ross_jsy]

the bumper part isnt the problem, more the tech 2 bit

and thats exactly what i was after, cheers

[MillRat]

If you do make something like this. We found it easiest to have the locating/supporting tabs on the side of the splitter which locate in the brackets on the side of the car (in front of the wheel). The front bumper also has a tab that locates into the same bracket on the car.

It will make your world a lot easier when putting the splitter on/off.

[ross_jsy]

i was thinking of using the stock side mount points as if im remembering correctly you just slide it on, may be wrong on that though