Ferarri Eater?? Is it possible from an E30?

General E30 related discussions -
Please put technical questions in E30 Tech Help forum below

Moderator: martauto

E30-830
E30 Zone Newbie
E30 Zone Newbie
Posts: 144
Joined: Fri Feb 27, 2009 11:00 pm
Location: Co.Louth, Ireland

Thu Mar 04, 2010 7:27 am

Ok, so after lookin at some videos on you tube of some E30s and seen some E30s that are throwin out 800+ BHP, some that could leave a ferarri or a lambo behind,8O I got to wondering just how cheaply can you create your own ferarri eater?? Without heavy chopping up of the shell to fit V12s or V10s in.

What engine would be a good base to start tunning from??

Are there any zoners that have created such an E30??

Any thoughts or ideas on this??:)
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Thu Mar 04, 2010 8:07 am

What do you mean by cheap?

800bhp and cheap don't really go together. :wink:
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
User avatar
Messenjah
E30 Zone Regular
E30 Zone Regular
Posts: 563
Joined: Mon Dec 31, 2007 11:00 pm

Thu Mar 04, 2010 8:12 am

well alot of it is down to gearing and power to weight aswell as power ...


i think to get enough power down to make the most of some different gearing though you would need to tub or arch the rear to fit wider wheels and tyres

i reckon you could get an e30 down to 1000kg and a murcialago SV has a power to weight ratio of 429bhp/ton

so theoretically you would need only that if you were in a spherical e30 in a vacuum

there are other forces to think about like wind resistance and friction


the SV is 4wd so has a friction advantage to get off the line but dissadvantage once moving and it has massive aurodynamical advantages

so to be a sure fire winner in my humble opinion youwould need about 600bhp and appropriate gearing
jaistanley
E30 Zone Addict
E30 Zone Addict
Posts: 2517
Joined: Tue Jan 18, 2005 11:00 pm
Location: Coventry and Essex

Thu Mar 04, 2010 8:12 am

Combine a large turbo and an S50 engine, or install a big power jap engine like a supra lump and you'll have something that can accelerate in a straight line like nothing else. My S50'd car is quicker than a friends 911 but come to the corner at the end of the straight and he'd sail past me like I'm not there (and he's a crappy driver compared to me.. lol).

In my oppinion I really couldn't use much more power and torque than my S50 can kick out, you have to be realistic about how much use your pub horsepower actually is!
Image
DHFiS
Old Skooler
Old Skooler
Posts: 2733
Joined: Sat Aug 12, 2006 11:00 pm
Location: cambridge

Thu Mar 04, 2010 8:16 am

If you can afford to modify an E30 to exceed the performance of a Ferrari you have enough money to buy a Ferrari.
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon
Contact:

Thu Mar 04, 2010 8:17 am

well a m20 2.7 turbo with 1150 kgs with 500bhp should be any match for a ferrai but rember the e30 is i styled like a brick compared with a Ferrai so the drag coefficient is alot higher :D
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Thu Mar 04, 2010 8:32 am

None of the above are in any way cheap. I really like the idea of a supercharged S50 though :cool:
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
User avatar
w17led
E30 Zone Regular
E30 Zone Regular
Posts: 357
Joined: Sun Mar 13, 2005 11:00 pm

Thu Mar 04, 2010 9:07 am

My last supercharged e30 m3 was pushing out just under 500 bhp and was about 3 cars lenghts behind a gallardo lp560.

Obviously on a rolling run. Would get left for dust off a launch as no traction.

My new turbo s50 should be fun, just need a decent shell, if anyone knows of any winkeye
oldroydsr4
E30 Zone Squatter
E30 Zone Squatter
Posts: 1579
Joined: Tue Oct 25, 2005 11:00 pm
Location: Warwick

Thu Mar 04, 2010 10:55 am

I depends which ferrari.

Last time i was at the pod a 355 did a 13.1 quarter - I'm pretty sure an S50 could easily match this.

If you want big cheapish power go for the toyota 1JZ turbo lump, with a single turbo and fueling to match 500bhp is not a problem, the gearboxes are bullet proof and at the moment engines are cheap.
E30-830
E30 Zone Newbie
E30 Zone Newbie
Posts: 144
Joined: Fri Feb 27, 2009 11:00 pm
Location: Co.Louth, Ireland

Thu Mar 04, 2010 11:57 am

Dezzy wrote:What do you mean by cheap?

800bhp and cheap don't really go together. :wink:
I mean how much horse power can ya get for your buck and which engine would be the best for this.:)
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Thu Mar 04, 2010 1:36 pm

i think m50's handle boost very well.

supposedly with arp head bolts and a MLS head gasket they will take 500hp
da4x4turbo
E30 Zone Regular
E30 Zone Regular
Posts: 866
Joined: Wed Mar 09, 2005 11:00 pm
Location: Circumnavigating the globe...
Contact:

Thu Mar 04, 2010 1:40 pm

I think this has been answered above!

So what's the story behind the question anyway? Are you actually interested in doing this or is it just a question being asked out of curiosity?

My 2 cents on the topic is that even if you throw enough money (We're talking astronomical figures here) at an E30 to make it outperform / outhandle a Ferarri it doesn't matter.

The other guy will still have a Ferrari. End of story!

It's all well and good to make an E30 perform at it's very limits, but some cars are in another league and always will be.

It's like that scene in the first Fast and the Furious Movie where the Vin Diesel smokes the Black Ferarri in the Supra... Do you really think the guy in the ferrari would give a toss in real life? He'd probably go back to his malibu mansion and spent the evening wearing the supermodel who was in his passenger seat as a hat!

Sure you can make an E30, or any car go faster than a Porsche/Ferrari/Lamborghini, but who cares really. Certainly not the Porsche/Ferrari/Lamborghini owners anyway!

I'm S50'ing mine by the way. 320hp should be loads for now. I'll consider more if I think I need/want it when it's done.

Cheers,

Seány
Anyone who knows of an S50 B32/B30 E30 for sale, please let me know.
town325i
E30 Zone Team Member
E30 Zone Team Member
Posts: 7050
Joined: Thu Jun 26, 2008 11:00 pm
Location: cannock staffordshire

Thu Mar 04, 2010 1:56 pm

da4x4turbo wrote:Sure you can make an E30, or any car go faster than a Porsche/Ferrari/Lamborghini, but who cares really. Certainly not the Porsche/Ferrari/Lamborghini owners anyway!
Now thats where your wrong if i owned one of those cars and a 20 year old turd pulled up along side me i would be pissed if it left me. You only buy one of those cars because you know they are fast and will smoke most things on the road. Im sure someone who pays 100k for a car would be realy pissed if a £500 car has just beat them in a traffic light gp. :roll:
Image
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Thu Mar 04, 2010 2:01 pm

town325i wrote:
da4x4turbo wrote:Sure you can make an E30, or any car go faster than a Porsche/Ferrari/Lamborghini, but who cares really. Certainly not the Porsche/Ferrari/Lamborghini owners anyway!
Now thats where your wrong if i owned one of those cars and a 20 year old turd pulled up along side me i would be pissed if it left me. You only buy one of those cars because you know they are fast and will smoke most things on the road. Im sure someone who pays 100k for a car would be realy pissed if a £500 car has just beat them in a traffic light gp. :roll:
There are 2 supercar buyers.

1. the type that thrash the arse off the buggers and use them as they should and

2. The posers,

neither are going to be hooped about a 20 yr old car that is quicker.. you forget these cars don't have a great deal of grip. I know 911's etc the smallest tyre your going to see is a 295.. now, lets see a 235 is too wide for a standard e30.
Bollocks to this 24v scrap!
User avatar
toby
E30 Zone Addict
E30 Zone Addict
Posts: 3609
Joined: Thu Aug 11, 2005 11:00 pm
Location: Kent

Thu Mar 04, 2010 2:05 pm

A £500 E30 is never going to beat a supercar.
town325i wrote:
da4x4turbo wrote:Sure you can make an E30, or any car go faster than a Porsche/Ferrari/Lamborghini, but who cares really. Certainly not the Porsche/Ferrari/Lamborghini owners anyway!
Now thats where your wrong
No he's right. Not unless the Ferrari owner has a really, really small penis and huge ego. Which is likely I admit.









How cheaply can it be done????
It can't be done cheaply at all!!!
Image
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Thu Mar 04, 2010 2:19 pm

Put it this way I have maybe 2k in my M50 build. Custom 3.0lt with S50 pistons, M52 crank and shrick cams in the head. The bores have had 2mm out of them. The block has been decked by 0.5mm for increased c/r.
I have enlarged throttle body, standalone management and lightened flywheel paddle clutch etc etc.
If I see 270bhp I will be over the moon.

For 800bhp write a blank cheque.
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
sihooker
E30 Zone Addict
E30 Zone Addict
Posts: 2172
Joined: Fri Nov 07, 2008 11:00 pm
Location: Hastings, East Sussex

Thu Mar 04, 2010 2:26 pm

There have been a few mental 1000bhp+ E30's featured in PBMW that would beat a super car of the mark. One of them (green paint with carbon bonnet) is alleged to do 60mph in 2.5 secs, but it cost the owner around £80K to build!

I'd rather have that than a Ferrari, purely for it's uniqueness, but it's an out and out drag strip monster. For day to day use it would probably be way too much after a while...
User avatar
weed1
E30 Zone Newbie
E30 Zone Newbie
Posts: 39
Joined: Sun Oct 04, 2009 11:00 pm

Thu Mar 04, 2010 2:59 pm

Easy. Pick a type 2 (poser) with his bird next to him.
He'll miss a shift and you'll have him sorted. :wink:

m
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7606
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Thu Mar 04, 2010 3:06 pm

Dezzy wrote:Put it this way I have maybe 2k in my M50 build. Custom 3.0lt with S50 pistons, M52 crank and shrick cams in the head. The bores have had 2mm out of them. The block has been decked by 0.5mm for increased c/r.
I have enlarged throttle body, standalone management and lightened flywheel paddle clutch etc etc.
If I see 270bhp I will be over the moon.

For 800bhp write a blank cheque.
Dezzy, this is in no way disrespect to the big displacement m50 engines, but when sinking that money into the them, wouldn't buying an s50 have been an easier option? I know they cost more to fit in the engine bay(with the manifold drama), but the fact it has ITBs and more tuneability later on down the line make it a no brainer IMO.

I think if you costed all of your time you put into the m50, you'd be suprised! On the plus side, you have a 'fresh*' engine.

Not being negative, far from it, I loved Dans car, and it smoked me by a frigging mile at the Pod, but is it worth the drama over slotting in an s50


*With second hand crank, pistons, liners etc.
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Thu Mar 04, 2010 3:18 pm

Totally agree mate. If I had spent 2k in one lump I would have been daft not to got down the S50 route. They are a heavy lump though. Dan was doing 13.8 at pod which is the same as barry's old S50'd car was doing the same day at York. Dans M52 built into M50 block has 243bhp an S50B30 has 280-290bhp. Real world a light well ballanced E30 is a better package IMO.

Also it's a low milage crank and shells, new bores no liners in the M50 with new rings.

The other thing is my motor is a 1 off. No one has one the same. I am the first to build one this way. All these things are the reason I have gone down this route.

I still will build an S50 E30 one day and put my M50 in a track car. winkeye
Last edited by Dezzy on Thu Mar 04, 2010 3:41 pm, edited 1 time in total.
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
User avatar
w17led
E30 Zone Regular
E30 Zone Regular
Posts: 357
Joined: Sun Mar 13, 2005 11:00 pm

Thu Mar 04, 2010 3:21 pm

I agree with dax4x4turbo.

You can get a e30 to beat most supercars on the straight, with enough money, but most supercar owners would not give a toss.

But it still feels good when you keep up with somehting worth over 100k.

Pics of my e30, under my username.
ross_jsy
Married to the E30 Zone
Married to the E30 Zone
Posts: 7307
Joined: Sun Jul 12, 2009 11:00 pm
Location: Jersey, C.I.

Thu Mar 04, 2010 3:24 pm

dont know about anyone else, but if i was stinking rich i would ruch rather have a monster of a sleeper, like that turbo koenenseg engined ford granada, what a hero car
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7606
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Thu Mar 04, 2010 3:56 pm

Dezzy wrote:Totally agree mate. If I had spent 2k in one lump I would have been daft not to got down the S50 route. They are a heavy lump though. Dan was doing 13.8 at pod which is the same as barry's old S50'd car was doing the same day at York. Dans M52 built into M50 block has 243bhp an S50B30 has 280-290bhp. Real world a light well ballanced E30 is a better package IMO.

Also it's a low milage crank and shells, new bores no liners in the M50 with new rings.

The other thing is my motor is a 1 off. No one has one the same. I am the first to build one this way. All these things are the reason I have gone down this route.

I still will build an S50 E30 one day and put my M50 in a track car. winkeye
Understood old bean. :) Sorry I'm too used to farting about with K's and mi's. It certainly will be a weapon and it is nice to be able to spend a bit here and there, rater than one splodge!
Dezzy
CR24v it's a lifestyle
Posts: 11974
Joined: Thu May 15, 2008 11:00 pm
Location: Middlesbrough

Thu Mar 04, 2010 4:21 pm

No need for sorry mate. I didn't set out to make this engine it sort f built it's self. An idea here a wonder here a phone call to dan and we were off.

I think it will be nice though. Fingers crossed :cool:
Image
Co Founder of CR24vTM By Invitation Only. Absolutely no riff raff!!!
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Thu Mar 04, 2010 5:32 pm

I reckon the real question is "what can you do to an E30 to make it go round corners like a Ferrari" because that would be a real challenge!
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Thu Mar 04, 2010 6:25 pm

ive never came up against a ferrari in my touring but i reckon another with another £600 spent on mine getting it to around 400bhp and about 370lbft it wouldnt have been far away so its definately possible.
regardless of whether you beat one or not youd still be going home in a 20 year old bmw with him sitting smugly albeit maybe slightlyconfused in his supercar.
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15546
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus
Contact:

Thu Mar 04, 2010 6:41 pm

in a straight line is easy to do and build an e30 that will pin an italian super car, not cheap but easy. FI can solve the power, but traction of the line is always difficult so with rolling starts it helps, but after 140/150mph most e30's are unstable and pulling a higher top speed is difficult. however, if you've scared them and only a short distance away by the time you've got to 100 or 120mph the point is proven to be honest. i've certainly emabaresd a few porsche drivers of the years in my M3 which was boosted, never gone up against a ferrari

however i know of couple of natuarally aspirated e30's packing serious s14 and s54 power that will destroy a 360CS around a track, on the straights and on the twisty bits. now thats a challanhge and it was pretty fucking expensive.

i will also mention that they are road legal, MOT'd and taxed.
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
User avatar
bootyman
E30 Zone Addict
E30 Zone Addict
Posts: 4272
Joined: Mon Jan 10, 2005 11:00 pm
Location: Milan
Contact:

Thu Mar 04, 2010 6:59 pm

This baby would kill most supercars both in a straight line and around corners winkeye

Same chap who built my engine and i believe Dips now has this engine sitting in his house ready to go in his convertible. You have to see the car in the flesh to appreciate just how mental it is

http://79.170.40.248/prismmotorsport.co ... &Itemid=48
Image
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Fri Mar 05, 2010 1:09 am

about 6-8" extra width, rear sus that dosent camber up as much, a reduction in the CoG and some sticky tyres.

a Ferrari may be a super car but there still held by the bounds of physics, the only think an mr engines supercar has over an e30 is polar moment of inertia. every thing else can be fixed.

and as far as the "he still has a Ferrari" argument, there really fucking awful cars, iv had the displeasure of working on a few and seeing under the skin of a lot more, lets just say what you cant see from the outside looks like it was made by fiat. an e30 bmw is 10x the quality in terms of parts and engineering.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15546
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus
Contact:

Fri Mar 05, 2010 1:32 am

HairyScreech wrote:about 6-8" extra width, rear sus that dosent camber up as much, a reduction in the CoG and some sticky tyres.
not needed,

you can get 245 under the rear arches with some arch massage, and 265's on an e30 M3. as for camber, simple soution. canmbet tabs which you weld on to rear beam and use some eccentric bolts.

there are few e30's out there which are silly quick, there's G57YLE's car, which 2JZ powered, as ben mentioned Prism Motorsports e30 with is TVR/rover V8 twin turbo power, and
a friends H36 e30 M3 pulls 170+mph, and sprints to 60 in about 5 seconds, drop the gearing a touch and bring the top speed down to 155mph and it'll be even quicker.

so the ground work is there, it just takes some money.
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Fri Mar 05, 2010 2:59 am

oh i totally agree with you there, theres nothing an ferrari dose in terms of suspension and tyres that an e30 cant be made to do, or even do better.

the width increase was sugested due to this cars quite narrow track and high cog compred to something like a ferarri, you would have to do a lot of lowering to produce the same reduction in the overturning moment of the e30 that could be achieved with 4" more width each side.

if you think of a triangle drawn from each wheel centre to the cog, then the ratio of cog heigh to base width is critical, the lower the cog and the wider the base the better in terms of load transfer between the inside and outside tyre on corner.


camber tabs, yeah that would do the trick, ideally combined with raising the pick up points like a touring car so the sus still works as its designed to do but with the body a lot lower.

sticky tyres will be a major help, a normal road/sport tyre will do in the region of 1-1.5g something awesome possibly up to 2g or more, so theres the potential for twice the cornering force with no other upgrades there. and obviously were dealing with proper interlocking friction so the old chestnut of friction being related to pressure and area are all skewed so more rubber on the ground with the same pressure means more grip.

end of the day, cars a car, same rules apply to all of them, be it a model t or a formula ford.

edit- and thats not to sound like im teaching my gran to suck eggs, im sure you know all that as well as i do.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
User avatar
bootyman
E30 Zone Addict
E30 Zone Addict
Posts: 4272
Joined: Mon Jan 10, 2005 11:00 pm
Location: Milan
Contact:

Fri Mar 05, 2010 7:39 am

At the end of the day anyone with money can walk in a showroom and buy a Ferrari or any other supercar. Isn't it much more fun to actually be involved in building the car from scratch with your own input! I dont drive my car much and at the moment it's only mapped to nearly 300 bhp at 1 bar of boost as the clutch is all over the place (I will change for a race clutch soon and release the full power of the car), but i grin every time i drive it cause the power in the mid range is fantastic and like Kos says once you blow someone away to 120mph - 130mph the point is proven and i dont feel i need to carry on. I had a play with a Lambo on the M25 a few weeks back and it all started with him so far up my back side he could almost see what i had for lunch, so i pulled over and let him pass me and then returned the favor even though i couldnt put the power down cause of the clutch. It was fun though and i'd like to think i gave him something to think about. It certainly made my day anyway! :wink:
Image
User avatar
S38B38
E30 Zone Regular
E30 Zone Regular
Posts: 458
Joined: Sun Dec 24, 2006 11:00 pm
Location: Iceland

Fri Mar 05, 2010 8:19 am

Just keep in mind that an oem E60 M5 beats the F430 on higher speeds,,

the E39 M5 eats the F355


and both of my cars smokes a bunch of Ferraris


just remember,,

Ferrari are maby not the best car in the world BUT THE GREATEST
Sveinbjörn Hrafnsson

E30 CABRIO M70B50 V12 5lug

ALPINA B10 BITURBO 346@507

550 V12 JML Motorsport

http://alpina.123.is/pictures/
Morat
E30 Zone Team Member
E30 Zone Team Member
Posts: 8943
Joined: Thu Feb 09, 2006 11:00 pm
Location: The Peoples Republic of Yorkshire

Fri Mar 05, 2010 11:02 am

245s on the back eh? I'm assuming you'd need to reinforce the diff mounting too if you're running lots of power and more grip?
E30 Touring 0.35 cD - more slippery than prison soap :)

Image
Praise the Lard... and pass the dripping!
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15546
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus
Contact:

Fri Mar 05, 2010 7:38 pm

Morat wrote:245s on the back eh? I'm assuming you'd need to reinforce the diff mounting too if you're running lots of power and more grip?
depends on the state of the car to start with , but the cars i knw of with big power and bigger tyres do not run stock diffs or mountings
PUKAR DESIGNS - Reproduction BMW Decals Labels Sticker & Number Plates
www.pukardesigns.com
www.facebook.com/pukar.designs/
IG Pukar.Designs
Post Reply