318iS vs 318i Suspension?
Moderator: martauto
Hi,
Sorry if this is in the wrong section.
Can anybody tell me the differences in suspension between the 318i and 318iS?
I have an iS and have been looking on Eurocarparts. For a start they list the dampers as the same part number.
Is this the case? I presumed it had different damper rates.
Thank for any help!
Sorry if this is in the wrong section.
Can anybody tell me the differences in suspension between the 318i and 318iS?
I have an iS and have been looking on Eurocarparts. For a start they list the dampers as the same part number.
Is this the case? I presumed it had different damper rates.
Thank for any help!
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
If you need front shock absorbers/danpers, then make sure you buy the ones that fit into a 51mm front strut.
In diagram below 1 is the strut/leg. 2 is the shock. 2 goes into 1
http://bmwfans.info/parts/catalog/E30/T ... _absorber/
Finished look is below

In diagram below 1 is the strut/leg. 2 is the shock. 2 goes into 1
http://bmwfans.info/parts/catalog/E30/T ... _absorber/
Finished look is below

Last edited by Sanchez on Tue Feb 16, 2010 10:18 pm, edited 1 time in total.
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
http://www.eurocarparts.com/ecp/c/BMW_3 ... 194b5&SHKA
Thats what you need. Make sure is you use the ECP site check the parts are for the 16v 1796cc M42B18
Thats what you need. Make sure is you use the ECP site check the parts are for the 16v 1796cc M42B18
-
e30318ilover
- E30 Zone Newbie

- Posts: 218
- Joined: Sat Jan 23, 2010 11:00 pm
I really dont know it makes me giggle everytime i see itpac1982 wrote:Off topic but what the hell is your sig pic all about, thats left me disturbed!!e30318ilover wrote:45mm
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
djones wrote:Brilliant, thank you!!
Over the next few months people are going to get so sick of my random questions haha
Is a BMW dealer the only place to get them for the iS then?
Nope the link I gave you fot ECP are the rear shockers for the 318is. Front ones are there.
http://www.eurocarparts.com/ecp/c/BMW_3 ... ddad4&SHKA
ah, but thats the same part number as this, which is presumably the 'normal' 318i
http://www.eurocarparts.com/ecp/c/BMW_3 ... c35e6&SHKA
edit...
Unless the same suspension was some how an option on the 318i? They do seem to also list a cheaper one (same brand) for the 318i as well.
http://www.eurocarparts.com/ecp/c/BMW_3 ... c35e6&SHKA
edit...
Unless the same suspension was some how an option on the 318i? They do seem to also list a cheaper one (same brand) for the 318i as well.
Its the same for the springs, they are all the same part number
Thats an issue for ECP though. The bit I needed to know has been answered and thats brilliant as I'd have ended up with the worng parts!
Are the rears dampers/springs different as well I presume?
Thats an issue for ECP though. The bit I needed to know has been answered and thats brilliant as I'd have ended up with the worng parts!
Are the rears dampers/springs different as well I presume?
I've just bought the car and have a bit of an OCD thing, so over the next few months will probably be replacing all the suspension including bushes.
I bought it as my daily driver as I have a concours 1998 Integra living in my garage which has pretty much everythign brand new on it (its only done 43k as well).
The idea was to just run the BMW and maintain it, but I've accidentaly stumbled across a really nice one. It needs a good polish etc but its going to be mint afterwards and I'm now looking at making this the same
The sad face is its going to end up costing me a fortune!
I bought it as my daily driver as I have a concours 1998 Integra living in my garage which has pretty much everythign brand new on it (its only done 43k as well).
The idea was to just run the BMW and maintain it, but I've accidentaly stumbled across a really nice one. It needs a good polish etc but its going to be mint afterwards and I'm now looking at making this the same
The sad face is its going to end up costing me a fortune!
-
e30318ilover
- E30 Zone Newbie

- Posts: 218
- Joined: Sat Jan 23, 2010 11:00 pm
http://www.e30zone.net/e30zonewiki/index.php/318iS
Read it if you have any questions ask frank
Read it if you have any questions ask frank
Sorry but it is really disturbing. Looks like some kind of screwed up rape sceen.e30318ilover wrote:I really dont know it makes me giggle everytime i see itpac1982 wrote:Off topic but what the hell is your sig pic all about, thats left me disturbed!!e30318ilover wrote:45mm
Felix79 aka Dan
If you got haters, then your doing something right!
E85 Z4M Roadster
If you got haters, then your doing something right!
E85 Z4M Roadster
-
e30318ilover
- E30 Zone Newbie

- Posts: 218
- Joined: Sat Jan 23, 2010 11:00 pm
The monster thing is just so funnyFelix79 wrote:Sorry but it is really disturbing. Looks like some kind of screwed up rape sceen.e30318ilover wrote:I really dont know it makes me giggle everytime i see itpac1982 wrote: Off topic but what the hell is your sig pic all about, thats left me disturbed!!
-
Blitz
- Married to the E30 Zone

- Posts: 11155
- Joined: Mon Jan 30, 2006 11:00 pm
- Location: East London+Basildon
Springs should be different.djones wrote:Thanks for that link it has some really useful info.
It mentions the suspension and also the 325i.... Reading between the lines does this mean the iS is the same as the 325i in terms of dampers/springs?
same as a 325isportdjones wrote:Thanks for that link it has some really useful info.
It mentions the suspension and also the 325i.... Reading between the lines does this mean the iS is the same as the 325i in terms of dampers/springs?
only the front springs are for a 6 pot on the sport.

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
Where do you guys usually get your parts like this?
I have a feeling ECP and GSF are just going to get this all wrong!
I'm already a bit confused myself what with all the combinations. Just found an online diagram and that mentions a second damper on the front
I have a feeling ECP and GSF are just going to get this all wrong!
I'm already a bit confused myself what with all the combinations. Just found an online diagram and that mentions a second damper on the front
-
e30318ilover
- E30 Zone Newbie

- Posts: 218
- Joined: Sat Jan 23, 2010 11:00 pm
Dealership is the only place i use except off other people for original parts
-
bmbartlett
- E30 Zone Newbie

- Posts: 142
- Joined: Fri Apr 03, 2009 11:00 pm
- Location: Essex
Would all four e30is springs, be able to replace 318i springs as a straight swap?
-
e30318ilover
- E30 Zone Newbie

- Posts: 218
- Joined: Sat Jan 23, 2010 11:00 pm
By now i wouldn't be surprised if your springs are saggy enough to set your cat at IS stance

