This is how I bought the car back in July.

It had a few things I wanted to sort out couple of bits of surface rust, rotten backbox, rusty tailgate.
So not having the enthusiasm to put my mini on the road for the summer the touring carried me to the Southern Mini days show for the weekend.

where it attracted a few comments and did a sterling job of doubling as a bed! I've done a fair amount of camping and have to say that its was several of the best nights sleep I've had while camping very comfortable.
The weekend after started on some of the paint work. It was suffering with pink syndrome on the drivers rear door and the passenger side panel of the bonnet so with the help of a friend set to work.

Masked and rubbed down.

Lacquered
At the same time I dealt with a rust bubble on the sill just under the door which required rubbing down to bare metal

treating priming and then top coating.

note every painters best friend the hair dryer in this shot.
A nasty scratch was touched in



compounded and finshed.
The next job was to get some kind of noise inside the cabin as when I bought the car the original radio was described to me as an antique, translated meaning barely working on the right rear channel but lights up and looks nice. So this was swiftly replaced with a nice alpine unit I had from a previous car but at the same time I replaced all the speakers and added tweeters.
I got the tweeters from someone on the board (sorry forgotten your name)

and promptly boiled them

this removed the old tweeters nicely but left the finish less than appealing so I grabbed the peanut butter and..


the pod on the left had the same finish as the right one but after being rubbed with peanut butter was good as new.
Next was fitting the new tweeters

So some high density foam from and the trusty cutting compass resulted in

followed by

and the finished article.

After this I attacked the small amount of rust in the drivers side boot pocket

rubbed down I haven't taken a finished shot yet but will do and update.
Next was the boot

recycled from the titanic possibly?

contact rash

What lurks beneath..


rubbed down and treated

All for the want of some waxoil.

Primed.


Top coat.

Lacquered.

Compounded.

Cleaned the numberplate light units, the left and right started out the same.
The weekend just passed I tackled these little beauties I had been putting off.


More of the same treatment was prescribed, rubbed down treated primed and top coat.

Again no finished pics yet as it is usually dark by this point!
In between all this the steering rack, clutch master and slave cylinders, engine mounts and viscous fan coupling were changed. I also fitted Cruise control and 13 button OBC. Still plenty to do but no need to rush into things
Finally some gratuitous shots to stroke my ego













