rrs's 325i touring/daily/money pit/obsession

Show off your pride and joy here

Moderator: martauto

rrs
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Jul 18, 2009 11:00 pm
Location: Kent

Post Tue Oct 27, 2009 1:37 am

Well I've been lurking on here long enough now and having nothing better to do this evening I wondered if some of you may be interested in what I've been up to.

This is how I bought the car back in July.
Image

It had a few things I wanted to sort out couple of bits of surface rust, rotten backbox, rusty tailgate.


So not having the enthusiasm to put my mini on the road for the summer the touring carried me to the Southern Mini days show for the weekend.
Image
where it attracted a few comments and did a sterling job of doubling as a bed! I've done a fair amount of camping and have to say that its was several of the best nights sleep I've had while camping very comfortable. 8O


The weekend after started on some of the paint work. It was suffering with pink syndrome on the drivers rear door and the passenger side panel of the bonnet so with the help of a friend set to work.


Image
Masked and rubbed down.

Image
Lacquered

At the same time I dealt with a rust bubble on the sill just under the door which required rubbing down to bare metal
Image

treating priming and then top coating.
Image
note every painters best friend the hair dryer in this shot.

A nasty scratch was touched in
Image

Image

Image
compounded and finshed.


The next job was to get some kind of noise inside the cabin as when I bought the car the original radio was described to me as an antique, translated meaning barely working on the right rear channel but lights up and looks nice. So this was swiftly replaced with a nice alpine unit I had from a previous car but at the same time I replaced all the speakers and added tweeters.

I got the tweeters from someone on the board (sorry forgotten your name)
Image

and promptly boiled them
Image
this removed the old tweeters nicely but left the finish less than appealing so I grabbed the peanut butter and..

Image

Image
the pod on the left had the same finish as the right one but after being rubbed with peanut butter was good as new.

Next was fitting the new tweeters
Image

So some high density foam from and the trusty cutting compass resulted in
Image

followed by
Image

and the finished article.
Image

After this I attacked the small amount of rust in the drivers side boot pocket
Image
rubbed down I haven't taken a finished shot yet but will do and update.

Next was the boot
Image
recycled from the titanic possibly?

Image
contact rash

Image
What lurks beneath..

Image

Image
rubbed down and treated

Image
All for the want of some waxoil. :roll:

Image
Primed.

Image

Image
Top coat.

Image
Lacquered.

Image
Compounded.

Image
Cleaned the numberplate light units, the left and right started out the same.

The weekend just passed I tackled these little beauties I had been putting off.

Image

Image
More of the same treatment was prescribed, rubbed down treated primed and top coat.

Image
Again no finished pics yet as it is usually dark by this point!

In between all this the steering rack, clutch master and slave cylinders, engine mounts and viscous fan coupling were changed. I also fitted Cruise control and 13 button OBC. Still plenty to do but no need to rush into things :o:

Finally some gratuitous shots to stroke my ego
Image

Image

Image
User avatar
miepower
E30 Zone Newbie
E30 Zone Newbie
Posts: 23
Joined: Thu Mar 01, 2007 11:00 pm

Post Tue Oct 27, 2009 3:57 am

wow...nice job there mate
M3Jim
E30 Zone Regular
E30 Zone Regular
Posts: 451
Joined: Sat Feb 07, 2009 11:00 pm
Location: Sussex

Post Tue Oct 27, 2009 7:43 am

Looks great, so nice to be able to do these jobs yourself, saves a fortune and is so satisfying!
dips346
London Meets Main Man
Posts: 3977
Joined: Fri Jan 14, 2005 11:00 pm
Location: heston/heathrow

Post Tue Oct 27, 2009 10:06 am

well done on the work ,the car looks nice and clean
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Tue Oct 27, 2009 10:11 am

Looks lovely! :cool:
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
schnaarf
E30 Zone Camper
E30 Zone Camper
Posts: 1076
Joined: Sun Jun 24, 2007 11:00 pm

Post Tue Oct 27, 2009 10:48 am

damn fine job mate. What kit did you use for the spraying?
ImysE30
Married to the E30 Zone
Married to the E30 Zone
Posts: 22478
Joined: Mon Jul 07, 2008 11:00 pm
Location: Derby Massive!!

Post Tue Oct 27, 2009 12:24 pm

Awesome job 8)
Current Fleet:

E30 335i Turbo M3 Convertible Replica
Alex
Married to the E30 Zone
Married to the E30 Zone
Posts: 22665
Joined: Fri Feb 11, 2005 11:00 pm
Location: Johannesburg, South Africa

Post Tue Oct 27, 2009 12:47 pm

looking good :)
Ollie_bwoii
Married to the E30 Zone
Married to the E30 Zone
Posts: 8695
Joined: Sat May 17, 2008 11:00 pm
Location: Northampton

Post Tue Oct 27, 2009 12:53 pm

Sprayed with rattle cans? What laquer did you use? What primer did you use?
I would just basically like to know what the process was?




Touring looks stunning btw. :drool:
rrs
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Jul 18, 2009 11:00 pm
Location: Kent

Post Tue Oct 27, 2009 1:17 pm

Thanks everyone for the positive comments, there is still loads more that I want to do the bbs alloys really need a refurb as the finish is making a bid for freedom on all the wheels unfortunately among other things :cry: but I think I've done enough to get it through the winter without deteriorating too much just need to get some waxoil in the vital places. But a friend has just moved and found a pit in his garage so that should make life eaiser than layer on the drive to do everything.

Schnarrf It's a Clarke 60 litre compressor and gun from machine mart that I've had for a few years now I bought it originally to respray my mini and find it ideal for home use.

Forgotten that I had I fitted rear electric windows as well.
/// KAMI
E30 Zone Squatter
E30 Zone Squatter
Posts: 1811
Joined: Thu Dec 13, 2007 11:00 pm
Location: Bucks

Post Tue Oct 27, 2009 1:17 pm

looks good mate keep it up......
THE ULTIMATE DRIVING MACHINE
rrs
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Jul 18, 2009 11:00 pm
Location: Kent

Post Tue Oct 27, 2009 1:50 pm

Ollie It varies depending on which part you are looking at is there a specific part?

The Lacquer is single pack(1k) acrylic lacquer I think, will check next time I pop out to the garage.

The bits rubbed back to bare metal I usually rub down then treat with rust killing gel (deox-c) then brush on a zinc rich primer (Pori-15) and once dry flatten with 1500 grit wet and dry then spray or brush on top coat (depending where on the car it is) followed by lacquer if needed.

The door on the other hand I just keyed with 1500 grit and wet and dry and then lacquered the finish at this stage usually looks appalling but some effort with rubbing compound or t-cut to flatten the lacquer and create a shine.

I'm happy to talk more about this if its any help.

*edit* Forgot to say its far from stunning but your chromie on the other hand :eek: does it even know what rust is?
User avatar
KimH
E30 Zone Newbie
E30 Zone Newbie
Posts: 186
Joined: Thu Dec 06, 2007 11:00 pm

Post Sat Dec 12, 2009 11:39 pm

I am now dis-chuffed; thought mine was nice until I met yours. Still, you show what is possible with a little application.

On day others will appreciate what we do already: E30 Tourings are sooooo cool. Until then, keep it quiet and watch the investment repay itself many times over.
gareth
E30 Zone Team Member
E30 Zone Team Member
Posts: 11005
Joined: Tue Jan 11, 2005 11:00 pm
Location: hastings, east sussex

Post Sun Dec 13, 2009 12:43 am

wow, looks like you've been busy :D
it certainly looks the part now, like you've taken 10 years off at least :cool:
Sole founder of Fe2O3-12V it's a lifestyle
Image
LSD rebuilding / modification services provided, PM for details
rrs
E30 Zone Regular
E30 Zone Regular
Posts: 421
Joined: Sat Jul 18, 2009 11:00 pm
Location: Kent

Post Sun Dec 13, 2009 1:04 pm

Thanks the pics make it look better than it is still things to do as with any E30, I've now given up on cleaning the wheels as the finish is too far gone, will just refurb them in the spring
tonybtonyb
E30 Zone Addict
E30 Zone Addict
Posts: 3580
Joined: Wed Jun 13, 2007 11:00 pm
Location: essex

Post Sun Dec 13, 2009 1:06 pm

What a great job! :mad:
They don't make bm's like this anymore!..They should.
Image
Guest

Post Sun Dec 13, 2009 5:23 pm

Nice work, looks nice and tidy :cool: