325i sport wiring loom
Moderator: martauto
-
sidewaysbm
- E30 Zone Regular

- Posts: 252
- Joined: Sat Aug 20, 2005 11:00 pm
- Location: Northern Ireland
hi, had a bit of a fire in the engine bay and was wondering would i need to replace the entire wiring loom in the car, or does the engine loom unplug from the rest of the loom? Also any ideas on what caused this? 
-
Andy325i
- E30 Zone Addict

- Posts: 4052
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Avon
The engine loom just plugs in at the bulkhead plug mate.
Where is the fire damage?
Andy
Where is the fire damage?
Andy

M50B25NonVanos & M52B28Vanos Heads for sale. Pm Me.
-
sidewaysbm
- E30 Zone Regular

- Posts: 252
- Joined: Sat Aug 20, 2005 11:00 pm
- Location: Northern Ireland
i am not exactly sure where it started, could it have been a loose wire? how much would a replacement engine loom cost?
-
Andy325i
- E30 Zone Addict

- Posts: 4052
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Avon
Best to get one off a zoner (look in the parts for sale section) make sure you get the right one, there are 2 types, early and late (early has 2 rows of ecu pins, late has 3).
Should be no more than 30 pounds
Could be electrical or petrol etc?
Andy
Should be no more than 30 pounds
Could be electrical or petrol etc?
Andy

M50B25NonVanos & M52B28Vanos Heads for sale. Pm Me.
-
sidewaysbm
- E30 Zone Regular

- Posts: 252
- Joined: Sat Aug 20, 2005 11:00 pm
- Location: Northern Ireland
will any late model do, or does it have to be a 325i loom?
Thanks
Thanks
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
i have an early 325i engine loom
-
sidewaysbm
- E30 Zone Regular

- Posts: 252
- Joined: Sat Aug 20, 2005 11:00 pm
- Location: Northern Ireland
sorry boss, my car is 1990. 
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
Do you have the check control on the car ?
There is NO nucleus.
-
sidewaysbm
- E30 Zone Regular

- Posts: 252
- Joined: Sat Aug 20, 2005 11:00 pm
- Location: Northern Ireland
whats that? 
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
The button and all the red lights above the rear view mirror, It tells you if any bulbs have failed or fluid levels are low.
There is NO nucleus.
-
sidewaysbm
- E30 Zone Regular

- Posts: 252
- Joined: Sat Aug 20, 2005 11:00 pm
- Location: Northern Ireland
dont have anything like that 
-
Jos
- E30 Zone Camper

- Posts: 1104
- Joined: Mon Jan 17, 2005 11:00 pm
- Location: Belfast
The 2 engines I have taken out the engine loom plugs into the fuse box and the ECU multiway fits back through the firewall behind the dashboard on the right hand side. Provided the fire wasn't near the fusebox you should be able to replace just the engine loom. If the fusebox is gone too I think there is another big multiway behind the glovebox that you can disconnect to get the fusebox out.
The other issue is if you had a fire started from an electrical short you need to be careful that it hasn't fried any of the wiring in the car.
The other issue is if you had a fire started from an electrical short you need to be careful that it hasn't fried any of the wiring in the car.
'89 Touring - slightly rippled with a rusty underside
'94 e36 tree climber
'94 e36 tree climber
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
fusebox can`t be replaced its pretty much wired in, it would take less time to replace the whole loom
-
sidewaysbm
- E30 Zone Regular

- Posts: 252
- Joined: Sat Aug 20, 2005 11:00 pm
- Location: Northern Ireland
could this fire have harmed anything else?
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
i would have a good look at the wiring that comes through the bulhead behind glovebox,
i had this on my old 320i the wiring had melted from the engine bay to fusebox and about 6 inches through into area behing glovebox.
i replaced the whole loom
i had this on my old 320i the wiring had melted from the engine bay to fusebox and about 6 inches through into area behing glovebox.
i replaced the whole loom
-
sidewaysbm
- E30 Zone Regular

- Posts: 252
- Joined: Sat Aug 20, 2005 11:00 pm
- Location: Northern Ireland
did you find out what the cause was?
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
no i bought the car cheap with electrical problems, but then it got worse and smoke came from the engine bay one done when i went to start it, after finding all the wires melted i replaced the entire loom

