Refurbing your alloys DIY {Wheels now in primer}

Show off your pride and joy here

Moderator: martauto

m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Mon Sep 28, 2009 4:07 pm

OK so I thought I would put together a DIY for refurbing your alloys. Now there is plenty of ways to do this, but I thought I would use basic tools everyone has or can get cheaply and easily.

Normally I would use air sanders, die grinders and even a lathe but not everyone has these tools.

Anyway here is the wheels in desperate need of a refurb. They are 14inch BBSs and are suffering from bad gutter rash.

Image

First thing to do is remove the tyres from the wheels. Your local tyre shop can do this.

Image_______________________________________________

Get some basic tools. You will need.
jack and jack stands
wheel brace
saftey goggles
gloves
Some hand files
Sand paper
filler
etch primer
high fill primer
paint
caustic soda
bucket big enough for one wheel
High powered hose or preferably a gurney

Image

The wheels should be clean before working on them, this helps show up imperfections and makes the job nicer to do.

Put in your gloves and safety goggles
Fill the large bucket up with water and add some caustic soda. I added about a cup full. Place the wheel in the caustic soda solution and the water will start to bubble like soft drink. Now you cant leave it in there all day. Apparently caustic soda eats aluminum. I left them in there for 20 mins. Remove the wheels and hose with your high pressure water gun or gurney.

Here you can clearly see the difference. I tried everything to clean the filth off these. Degreaser, thinners, prepsol you name it. Nothing would remove this gunk. Until I tried caustic soda. Pretty impressive isnt it?
Image
Image_______________________________________________

Now jack up your E30 and remove one of the rear tyres. Important you must lift both rear wheels off the ground. Mount the rim that needs refurbing on the car. Inspect the damage to the rims, as you can see this one is pretty bad.

Image

Start the car and place it in gear.

Image_______________________________________________

Now using your hand file place it on the edge of the rim rotating it around the bead, We are using your E30 as a lathe by moving the file across the damaged lip. Its important to give it a nice round lip and not square. If the kerbing is real bad you wont be able to remove all of it. What we are trying to do is remove the majority of it.
Image
Image


Once we have finished with the file its time to move on to the sand paper. I start with a very course paper 40p and work my way up the grades. 40, 80, 120, 180 , 240 and 320p. Now this will remove all the file marks and some of the minor imperfections.

Image

This is what you will be left with.

Image

The missing bits in the edges will need filling and then sanding, for this I use the QBond pictured above. Its a like a epoxy filler and it goes off in seconds as is super super strong.

ImageImage

Now its time to clean the wheels ready for primer. Prepsol is the cleaner of choice for this.

Image

Now we are ready to prime the wheels, before so you must give the wheels a thorough cleaning with the prepsol. For thos of you who dont have the facilities to paint, you could drop the wheels off at your friendly panel shop to do the rest.

Wheels in highfill primer.

ImageImage

From here the wheels will get a guide coat and some wet sanding.

Stay tuned.

P.S you guys think BBS wheels are hard to keep clean? Try painting the buggers. Very hard to avoid dry spots and super easy to get runs. A real nightmare to paint. Might take it nice and easy when painting. I think lots of light coats is in order for these beauties.

Mike

Stay tuned
Mike
Last edited by m_jermyn on Fri Oct 09, 2009 11:59 am, edited 2 times in total.
leeparkes
Married to the E30 Zone
Married to the E30 Zone
Posts: 9535
Joined: Thu Jan 03, 2008 11:00 pm
Location: Black country

Post Mon Sep 28, 2009 4:55 pm

I used this technique when i polished my bbs mahles,save bags of time but you do need to be carefull!
Cypriotgeeza wrote:I done both my mates in my old 318is
felt so proud,even tried it with a E30 325i and got put in my place.. :o:
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Mon Sep 28, 2009 4:58 pm

It's a great way to do it but also pretty dangerous :D
Image
cliffybabe
Powered by Nelly
Powered by Nelly
Posts: 10020
Joined: Sun Dec 18, 2005 11:00 pm
Location: Croydon

Post Mon Sep 28, 2009 5:53 pm

ive seen this done b4 a good way of doing it but id of wore gloves :mad:
Image
Considering Selling the Cabby, looks like its gonna go
DavieP
E30 Zone Regular
E30 Zone Regular
Posts: 731
Joined: Wed Aug 01, 2007 11:00 pm
Location: South Devon

Post Mon Sep 28, 2009 6:10 pm

That's certainly an heroic way of dealing with kerbed rims. I haven't got the guts to try it myself though. I'll remain a wimp and use a grinder :chuckle:
Dave in Torquay

Image
User avatar
tomislav
E30 Zone Squatter
E30 Zone Squatter
Posts: 1633
Joined: Thu Nov 29, 2007 11:00 pm
Location: Faversham, Kent

Post Mon Sep 28, 2009 8:30 pm

Man am i liking this idea!!!! I'll be keeping an eye on this! Update asap! :D
'Assumption is the mother of all f**k ups'
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Mon Sep 28, 2009 10:00 pm

that's not new.. I like the polishing machine at work for a bit of polishing doesnt take too long :)
Bollocks to this 24v scrap!
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Tue Sep 29, 2009 12:52 am

Yeah like I said, you have to be careful and use your common sense. I could of done it many other ways but alot of people dont have access to polishing machines at work.

If anyone has comments such as safety things ect ect I am happy to add them.
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Tue Sep 29, 2009 12:55 am

Don't put your fingers in the spokes? :)
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Tue Sep 29, 2009 8:02 pm

i refurb alloys so comes as second nature. I call for a video camera to be operating while working..
not for health and safety just for our benefit when you hurt yourself.. I love a good laugh!
Bollocks to this 24v scrap!
stevemed
E30 Zone Newbie
E30 Zone Newbie
Posts: 222
Joined: Thu Mar 05, 2009 11:00 pm

Post Wed Sep 30, 2009 12:50 am

How do alloys with tyres that big get so bad in the first place....... :mad:
e46 330cd
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Wed Sep 30, 2009 1:02 am

Bob_S wrote:i refurb alloys so comes as second nature. I call for a video camera to be operating while working..
not for health and safety just for our benefit when you hurt yourself.. I love a good laugh!
Your a nice fella arnt you!

the wheel dose not really spin all that fast, and being a panel beater I have seen what many of you so called alloy wheel repairers call repaired. some do a good job most however do not. And before you comment on panel beaters, im aware most of us do a poor job too.

No Idea how they got gutter rash on them I bought them like that. Previous owner I guess

Mike
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Wed Sep 30, 2009 4:32 pm

British ingenuity at it's best!

Good job - I'd still go with a proper restorer for nicer wheels though as I think they weld on alloy then grind down instead of using filler no?
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Wed Sep 30, 2009 10:08 pm

m_jermyn wrote:
Bob_S wrote:i refurb alloys so comes as second nature. I call for a video camera to be operating while working..
not for health and safety just for our benefit when you hurt yourself.. I love a good laugh!
Your a nice fella arnt you!

the wheel dose not really spin all that fast, and being a panel beater I have seen what many of you so called alloy wheel repairers call repaired. some do a good job most however do not. And before you comment on panel beaters, im aware most of us do a poor job too.

No Idea how they got gutter rash on them I bought them like that. Previous owner I guess

Mike
Indeed I am.

Generalising are we? unlike the scummers we repair wheels properly. Anyone can panel beat mate, a hammer and a tub of P40 and your away

Gutter rash? That will be down to the retard who owned them previously and managed to ram them into kerbs. Tyres are made of rubber they will flex
Bollocks to this 24v scrap!
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Wed Sep 30, 2009 11:57 pm

Clearly your trying to provoke me with that last comment, How long did it take you to learn how to repair alloys? Do a trade for that?
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Thu Oct 01, 2009 11:17 am

a good while.. we don't use hammers matey. I have to admit my electrical training took longer.

Provoke you? I wouldn't know what your on about
Bollocks to this 24v scrap!
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Thu Oct 01, 2009 12:41 pm

Bob_S wrote:
m_jermyn wrote:
Bob_S wrote:i refurb alloys so comes as second nature. I call for a video camera to be operating while working..
not for health and safety just for our benefit when you hurt yourself.. I love a good laugh!
Your a nice fella arnt you!

the wheel dose not really spin all that fast, and being a panel beater I have seen what many of you so called alloy wheel repairers call repaired. some do a good job most however do not. And before you comment on panel beaters, im aware most of us do a poor job too.

No Idea how they got gutter rash on them I bought them like that. Previous owner I guess

Mike
Indeed I am.

Generalising are we? unlike the scummers we repair wheels properly. Anyone can panel beat mate, a hammer and a tub of P40 and your away

Gutter rash? That will be down to the retard who owned them previously and managed to ram them into kerbs. Tyres are made of rubber they will flex
You've just shown yourself up a bit there pal - anyone can NOT panel beat.

It is a far faaaaaar more intricate and diverse skill and requires a wider range of real talent than alloy wheel repair / refurbishment.

Alloy wheel repair could be automated with any chump moving the wheel from strip vat, placing in lathe, place in paint booth. No doubt you;re good at it I'm sure but don;t compare it to a skilled panel beater - it's like someone who sharpens knives and a sword-maker!

Just my opinion of course winkeye
blitz877
AKA ajm-e30
Posts: 1761
Joined: Sun Oct 23, 2005 11:00 pm
Location: in a galaxy far, far away

Post Thu Oct 01, 2009 1:13 pm

panel beating easy?????????????? not bloody likely!! but then again refurbing wheels is quite a skill to get right too :D
Image
triggerhappy21
E30 Zone Newbie
E30 Zone Newbie
Posts: 74
Joined: Fri Aug 17, 2007 11:00 pm

Post Thu Oct 01, 2009 1:29 pm

Yeah gotta vouch for the panel beater here. It's still one of the most skilled trades I've ever seen in action.

as for someone taking the dings out of an alloy... hmmm... not really in a position to comment are you really? :roll:
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Thu Oct 01, 2009 1:33 pm

Im also a trade painter and run my own PDR business. I guess i can also do alloy wheel repairs. I can do more then you lol
blitz877
AKA ajm-e30
Posts: 1761
Joined: Sun Oct 23, 2005 11:00 pm
Location: in a galaxy far, far away

Post Thu Oct 01, 2009 1:50 pm

having done both and qualified in one of i can say that wheels can be tricky to get right there certainly no match for getting a car finished properly
Image
User avatar
Royalratch
E30 Zone Addict
E30 Zone Addict
Posts: 4921
Joined: Sat Oct 21, 2006 11:00 pm
Location: London

Post Thu Oct 01, 2009 8:32 pm

No disrespect to alloy wheel dudes but you could in theory automate it by telling a computer what size the wheel is and the paint finish - place in a lathe and away it goes.

Try getting a computer to pull a creased chassis rail dead straight, then strengthen it or check it's alignment, weld a new skin or panel onto body so that it lines up dead straight, smooth the welds down, beat out by HAND a dent in a perfectly concave panel.

The guys who repair 50's Jags, Ferraris etc I consider sculptors - to form those shapes is an incredible skill.

Do not disrespect it.
Last edited by Royalratch on Mon Oct 05, 2009 3:07 pm, edited 2 times in total.
d6dph
Married to the E30 Zone
Married to the E30 Zone
Posts: 12435
Joined: Sun Aug 14, 2005 11:00 pm
Location: Tiptree. Essex

Post Thu Oct 01, 2009 8:37 pm

Well I can't do any of these skills...... But I do have the power to ban you all.

Back on topic and stop bickering please gents, And Bob stop being a wind up merchant.
Image
Jim78
E30 Zone Regular
E30 Zone Regular
Posts: 550
Joined: Tue Jul 08, 2008 11:00 pm
Location: Mirfield, West Yorkshire.

Post Thu Oct 01, 2009 8:46 pm

The pics wheel spinning at the top remind me of that scene in Ferris Beuller - DON'T LEAN ON THE BONNET!!!!!
Image
rix313
E30 Zone Team Member
E30 Zone Team Member
Posts: 4970
Joined: Fri Oct 31, 2008 11:00 pm
Location: Silverstone

Post Thu Oct 01, 2009 11:52 pm

Jim78 wrote:The pics wheel spinning at the top remind me of that scene in Ferris Beuller - DON'T LEAN ON THE BONNET!!!!!
:lol:
bobbin1982
E30 Zone Squatter
E30 Zone Squatter
Posts: 1508
Joined: Mon Mar 23, 2009 11:00 pm
Location: Norwich,Norfolk

Post Fri Oct 02, 2009 12:33 am

Just looking at the underside of that car....
God aint you lucky living in a hot country with sod all rain lol
Wish my underside looked like that
Driving my digger!!!!
User avatar
jermyns
E30 Zone Newbie
E30 Zone Newbie
Posts: 159
Joined: Mon Jan 28, 2008 11:00 pm

Post Fri Oct 02, 2009 8:42 pm

Arhhh, just to enlighten you all, Mike (Australian)won the NSW State Gold Medal as the apprentice of the year when he completed his training, so not your run-of-the-mill panel beater if there is such a thing
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sun Oct 04, 2009 11:27 am

When's the next instalment coming?
I have a set of BBS that need a mild refurb,but I am not brave enough to us the back of the car as a lathe!
Thinking that it is a good excuse to buy one of those small power 'detail' sanders... winkeye
Youth is wasted on the young.
User avatar
Dreamracer1
E30 Zone Regular
E30 Zone Regular
Posts: 609
Joined: Sat Sep 06, 2008 11:00 pm
Location: Crymych, Pembrokeshire

Post Sun Oct 04, 2009 11:33 am

Not an Hero then Malcolm?
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Sun Oct 04, 2009 11:36 am

Dreamracer1 wrote:Not an Hero then Malcolm?
Not quite got the reactions that I had 40 years ago....
Youngster's just cannot see danger! :mad:
Youth is wasted on the young.
User avatar
Dreamracer1
E30 Zone Regular
E30 Zone Regular
Posts: 609
Joined: Sat Sep 06, 2008 11:00 pm
Location: Crymych, Pembrokeshire

Post Sun Oct 04, 2009 11:38 am

Snap :eek:
E-mail kandkwalden@aol.com, phone 07854043093
Please buy some of the bits off this old 320i!
m_jermyn
E30 Zone Team Member
E30 Zone Team Member
Posts: 4208
Joined: Sat Mar 14, 2009 11:00 pm
Location: Sydney Australia Mate

Post Sun Oct 04, 2009 11:42 am

Malcom come on man, you know you want that sander mate.

The only reason I used the car as a lathe is because everyone has one, not everyone has a big sander. Honestly its not as scary as it seams, you can stop the wheel from turning with your hand. (maybe because I dont have a LSD)

When I did my bottle tops I just did it with a file on the ground then followed by sandpaper but the kerbing wasnt that bad... The BBSs were pretty bad.

Stay tuned, next update will be tomorrow.

Mike
User avatar
Dreamracer1
E30 Zone Regular
E30 Zone Regular
Posts: 609
Joined: Sat Sep 06, 2008 11:00 pm
Location: Crymych, Pembrokeshire

Post Sun Oct 04, 2009 11:45 am

Malcolm, brace!!! :)
E-mail kandkwalden@aol.com, phone 07854043093
Please buy some of the bits off this old 320i!
DavieP
E30 Zone Regular
E30 Zone Regular
Posts: 731
Joined: Wed Aug 01, 2007 11:00 pm
Location: South Devon

Post Tue Oct 06, 2009 7:38 pm

I ground down badly kerbed rims on my wheels over the weekend. This was the least badly damaged:
Image
The wheels were sent to be treated with heavy duty degreaser and steam cleaned, which removed all of the ingrained dirt and brake dust. They were then rubbed down with P240 wet and dry. The next job was to deal with the rims, which had some very nasty kerb rashes and one or two bad nicks.

I used a 600W grinder and a part-worn 3" flap wheel. I was very nervous at first, but after a couple of light passes, I soon got the hang of it and took approximately 1/8th. off leaving a bevelled edge. Then I used a medium grade star contour wheel followed by fine grade to remove scratches. A quick buff with steel wool then P400 wet and dry left the rims ready for painting.
Image
Image
Image
Bare aluminium needs etch primer to ensure the paint adheres without flaking, so the next job is to give a couple of coats after cleaning down to remove any fine particles.

The rims and in-between the spokes will be bright silver while the spokes and centres will be gunmetal grey. 3 coats will be applied. I've already painted the centres and the match with the bodywork of the car (delphin grey ) is almost spot on. Once the wheels are painted, they will be given a couple of coats of lacquer. I was going to do that myself, but I've decided to send them to the bodyshop so I can be sure of a good protective layer.
Dave in Torquay

Image
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Post Thu Oct 08, 2009 8:37 am

Do not think that I would have the willpower to mask up a wheel like that for two colours!
Youth is wasted on the young.