B7's C2.7 Build - FINITO!!!!!!
Moderator: martauto
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
i've looked everywhere and i can't believe i haven't got a picture of an M20 on the engine stand timed up!
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
If you look at my photo, the crank mark isn't quite on the mark. If you rotated that to line up, the rotor I reckon would be at somewhere between 9 and 10 oclock. EXACTLY opposite to where you reckon yours was yesterdaySimon13 wrote:i've looked everywhere and i can't believe i haven't got a picture of an M20 on the engine stand timed up!
B7's Motto. "If it's French, BURN IT!!!!!!"
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
we going over tonight then?!
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
Too late. Been on the Pimms dear boySimon13 wrote:we going over tonight then?!
Tomorrow?
B7's Motto. "If it's French, BURN IT!!!!!!"
-
bigbhpwannabe
- E30 Zone Newbie

- Posts: 193
- Joined: Wed Jun 06, 2007 11:00 pm
bummerB7 wrote:Because the car is 20 odd miles away!bigbhpwannabe wrote:sumpcracker is bang on here i recon .SUMPCRACKER wrote:It can still be 180 out with all the mrks lined up , easy way to check is to reverse the plug leeds.
1-6
2-5
3-4
i cant belive that you have not tryed swapin the leads ,for the sake of a few mins the problem could be found ,
he has even written what leads to swap !
325i 4door turbo sleeper -
big turb
e36 carbonfibre wietech strutbrace for sale . 07919173179
big turb
e36 carbonfibre wietech strutbrace for sale . 07919173179
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
what time mush?
-
fowler
- Boost Junkie
- Posts: 3468
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: New Addington/Croydon
is this still an issue ladies ????
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
I'll bell you tomorrow. In a meeting from about 8 to 2 then a call at 4. Should be over there by 7? Any good to ya?Simon13 wrote:what time mush?
B7's Motto. "If it's French, BURN IT!!!!!!"
-
fowler
- Boost Junkie
- Posts: 3468
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: New Addington/Croydon
trev if you get stuck iam free wednesday PM
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
-
adit
- Married to the E30 Zone

- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
so are you going to amend the thread title now then? fibber! 

E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!
-
Gortour
- E30 Zone Team Member

- Posts: 9025
- Joined: Sat Sep 23, 2006 11:00 pm
- Location: Poole, Dorset
Did I miss the reason for all the fuel in the sump?
Currently slumming it in an E46 Touring
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
I think purely due to the fact it was fuelling the correct pots but firing on the wrong one. The only place for it to go is down.Gortour wrote:Did I miss the reason for all the fuel in the sump?
I'm saying all this, we don't really know if we've sussed it yet.
Ben, I'll be in touch mate if I need it torching......sorry if things still don't run. Cheers mate
B7's Motto. "If it's French, BURN IT!!!!!!"
-
josh-hocking
- Teenager with Taste !
- Posts: 2632
- Joined: Fri Mar 09, 2007 11:00 pm
- Location: In my garage (lytham st annes)
news???? all fingers crossed for you... 
Formal education will make you a living. Self education will make you a fortune.
Find a job you like and you will never have to work a day in your life!
Find a job you like and you will never have to work a day in your life!
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
OOOOOOHHHHH YES!!!!! She runs.
Cam timing was spot on as well. It was not 180 deg out! Lets have a competition to see whether anyone can gueass what it was. And Barry and Peter need not apply as they are already up to speed.
But once we found the issue, she barely saw the starter and it fired straight up, coolant bled a peice of p1ss and we actually spun her round the block (albeit with no bonnet
)
Seemed to have a slight hesitation between 3500 to 4500 RPM (I didn't push it too hard) where it seemed to want to hold back but it's booked in with Barry for an MOT Saturday at 12 so we can check themixture then as it seems fuel related.
Well happy and I'd like to thank everyone for their inputs. This Forum has to be the best in the land for assistance and support. But most of all I'd like to publically thank Simon for his endless help and the fact he's driven more times to Epsom to help me with this. Cheers mate, it's very appreciated.
Cam timing was spot on as well. It was not 180 deg out! Lets have a competition to see whether anyone can gueass what it was. And Barry and Peter need not apply as they are already up to speed.
But once we found the issue, she barely saw the starter and it fired straight up, coolant bled a peice of p1ss and we actually spun her round the block (albeit with no bonnet
Seemed to have a slight hesitation between 3500 to 4500 RPM (I didn't push it too hard) where it seemed to want to hold back but it's booked in with Barry for an MOT Saturday at 12 so we can check themixture then as it seems fuel related.
Well happy and I'd like to thank everyone for their inputs. This Forum has to be the best in the land for assistance and support. But most of all I'd like to publically thank Simon for his endless help and the fact he's driven more times to Epsom to help me with this. Cheers mate, it's very appreciated.
B7's Motto. "If it's French, BURN IT!!!!!!"
-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent
Fuel pipes on the wrong way round?
Congratulations on getting it started...
You must be over the moon!
Congratulations on getting it started...
You must be over the moon!

-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
Nope Toby! Neer a problem Trevor!
Put it this way i don't have to eat my hat
i'm not a total numpty. Our reputations have taken a hammering over this one!
Put it this way i don't have to eat my hat
-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent
Damn, I thought that was too easy - no insult to your installation/checking skills by the way - but I did think it would be something simple that you would sort out. Just glad Trev didn't throw the engine out and stick another in.
Really interested to see how this is after it is run in.
Really interested to see how this is after it is run in.
Last edited by toby on Wed Aug 05, 2009 12:59 am, edited 1 time in total.

-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
Fantastic news really happy for you
nothing more frustrating than lots of work put into a build that won't start
so..spill the beans what was it ?
nothing more frustrating than lots of work put into a build that won't start
so..spill the beans what was it ?
-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
Oh B0ll0cks, I'll tell you anyway I'm so happy.
No Toby not the fuel pipes. It was ignition related.
I got over there, started work on it and had the engine at TDC with the cam cover off the plugs out and the dis cover off. And the rotor arm was no where near number six as I'd suspected. Nor was it on No. 1 either. Si turns up and we scratch our heads. It was actually pointing to the next plug lead around from No.1. So we checked the cam timing via the marks. Absolutely spot on! F*cking wierd we thinks. So I take the rotor arm off and removed the cam wheel torx bolt. Immediately we spotted this:

Whats happened is that as I've torqued up the bolt while the engines on the stand, I've not noticed that the black plastic rotor mount disc has slipped from it's locating dowel, rotated a touch then relocated it'self by punching another locating hole! See where the metal locating key has re imbedded it'self on the centre metal bit.
And there you have it. Thats all it was. Lesson learned boys and girls.

No Toby not the fuel pipes. It was ignition related.
I got over there, started work on it and had the engine at TDC with the cam cover off the plugs out and the dis cover off. And the rotor arm was no where near number six as I'd suspected. Nor was it on No. 1 either. Si turns up and we scratch our heads. It was actually pointing to the next plug lead around from No.1. So we checked the cam timing via the marks. Absolutely spot on! F*cking wierd we thinks. So I take the rotor arm off and removed the cam wheel torx bolt. Immediately we spotted this:

Whats happened is that as I've torqued up the bolt while the engines on the stand, I've not noticed that the black plastic rotor mount disc has slipped from it's locating dowel, rotated a touch then relocated it'self by punching another locating hole! See where the metal locating key has re imbedded it'self on the centre metal bit.
And there you have it. Thats all it was. Lesson learned boys and girls.
B7's Motto. "If it's French, BURN IT!!!!!!"
-
e30topless
- E30 Zone Team Member

- Posts: 13595
- Joined: Wed Aug 23, 2006 11:00 pm
- Location: surrounded by scrap
i would never had suspected that !! exellent find chaps
now get it fuelled up and enjoy
now get it fuelled up and enjoy
-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent
Hardly a costly fix either - bonus!

-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
Numptys 
Engine conversions, Auto to manual conversions, parts, servicing etc etc... For anything e30 call 07718 901737
-
The_Diddler
- Love it up the more door !
- Posts: 3619
- Joined: Tue May 27, 2008 11:00 pm
- Location: Tamworth, Staffs Lovely!!!!!!
Fantastic news Trevor, well done to everybody, at last its runs.
I hope this chariot graces gaydon now

I hope this chariot graces gaydon now
-
EThreezero
- E30 Zone Camper

- Posts: 1007
- Joined: Mon Jun 20, 2005 11:00 pm
- Location: Central Caledonia

*******MERC E240 BREAKING..1998...LEATHER...ALL PARTS*******
-
Blitz
- Married to the E30 Zone

- Posts: 11151
- Joined: Mon Jan 30, 2006 11:00 pm
- Location: East London+Basildon
Great news. 
-
fowler
- Boost Junkie
- Posts: 3468
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: New Addington/Croydon
if it was on wasted you would not have this problem
glad you found the problem trev SI great work chaps
hope fully see it soon are you gents doing Gaydon this year ??????
glad you found the problem trev SI great work chaps
hope fully see it soon are you gents doing Gaydon this year ??????
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
-
bss325i
- E30 Zone Team Member

- Posts: 24532
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Guildford to i hope!
-
powelly
- E30 Zone Squatter

- Posts: 1649
- Joined: Wed Dec 06, 2006 11:00 pm
- Location: On the scrap heap
Congratulations chaps, I know this has caused some real heartache, hope to see this beast very soon. I thought it would be something silly, always is, even if it's not always obvious.
Le Mans Classic 2006-
bigbhpwannabe
- E30 Zone Newbie

- Posts: 193
- Joined: Wed Jun 06, 2007 11:00 pm
great news after takein a picture yesterday of my cam timing and lookin at it side by side with yours i did wonder why the cam timeing marks on both cams were right but the rotor arm looked about 40* out




325i 4door turbo sleeper -
big turb
e36 carbonfibre wietech strutbrace for sale . 07919173179
big turb
e36 carbonfibre wietech strutbrace for sale . 07919173179
-
winx
- E30 Zone Camper

- Posts: 1099
- Joined: Wed Jul 30, 2008 11:00 pm
- Location: almost certainly not working on my E30...
extralente!! Shame Simon doesnt have to eat his hat as I would have enjoyed it but chuffed for Trev!
Looking forward to seeing it on Wednesday night
Looking forward to seeing it on Wednesday night
-
E30Gheko
- E30 Zone Addict

- Posts: 3789
- Joined: Sun Sep 28, 2008 11:00 pm
- Location: Wirral
Hooray!! At last. I'm very pleased for you! Great work all of those that helped.

-
B7
- E30 Zone Team Member

- Posts: 15841
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
MATE! you gotta get that tin of Gunk out man!!!!bigbhpwannabe wrote:![]()
B7's Motto. "If it's French, BURN IT!!!!!!"
-
bigbhpwannabe
- E30 Zone Newbie

- Posts: 193
- Joined: Wed Jun 06, 2007 11:00 pm
haha ,thats nothing you should see the state of the rest of the engine bay hahaB7 wrote:MATE! you gotta get that tin of Gunk out man!!!!bigbhpwannabe wrote:![]()
i seen that u love a clean engine bay after readin your thread
http://www.e30tech.com/forum/showthread.php?t=79639
325i 4door turbo sleeper -
big turb
e36 carbonfibre wietech strutbrace for sale . 07919173179
big turb
e36 carbonfibre wietech strutbrace for sale . 07919173179
-
adit
- Married to the E30 Zone

- Posts: 13727
- Joined: Wed Jun 20, 2007 11:00 pm
- Location: portsmouth
so does this mean i won't get your 2.7 bottom end now then?
brilliant news Trev, well done boys 

E30 Parts Galore!! 07901 888019
[quote="bss325i"]
Get a f* grip,we are talking about 20+yr.old sub £10k cars here,NOT the crown jewels!

