M30 swap again :( (alilve again :))

[ImysE30]

Good new's, another E30 M30 is born

[zaust]

Good new's, another E30 M30 is Re-born

[blingsta]

maybe now i can try driving your car and see what the 3.64 lsd is like !!

[Rav335uk]

Nice one Zaust, back on the road again

[stembo21]

dint take long at all. i think i might put one in mine how much did it ll cost you

[zaust]

Cheer's guy's, Drove to rochester to see wilson the same evening. It pulls really well and sounds healthy.

Stembo it is a cheap conversion. 270 for the donner. 100 for the mounts and 100 for the prop. oil plugs filter and plop it in.

[zaust]

Had a re-map done today... spins up in third no prob's.... got the afpr and induction kit to do next, then slight adjustment of the map and I can't wait.

[johnl320]

Good to hear its back on the road

john

[Rav335uk]

Mine don't spin in third, i think its underpowered

[DRIFTBOY]

Maybe your tyres are too good!



What ecu are you using Marc?

[zaust]

179. so i'm impressed. only took ten min's before i was told tp pee off and have some fun.

Will be going msd after i have sorted coilovers, but that won't be till next year now. the engine really reacts well to a map. (much better than m20 )

also rebuilt sal's passanger seat today which was the last job on the list before the mot. so she should be back in the 2 tone with in a month.

[Rav335uk]

Maybe your tyres are too good!


Pirelli P Zeros

[DRIFTBOY]

Not Wingchungyang Ditchfinders then!

[DRIFTBOY]

179. so i'm impressed. only took ten min's before i was told tp pee off and have some fun.

That sounds very good, I didn't even know it was possible!

[Rav335uk]

Not Wingchungyang Ditchfinders then!

[blingsta]

who done the re-map mate ?

[zaust]

179. so i'm impressed. only took ten min's before i was told tp pee off and have some fun.

That sounds very good, I didn't even know it was possible!

Not from stand still. When changing up in to third at a decent pace, Traction is lost and i'm tramping up the road at --mph

btw michelin sport with lot's o tread....

[zaust]

who done the re-map mate ?

Adi

[DRIFTBOY]

179. so i'm impressed. only took ten min's before i was told tp pee off and have some fun.

That sounds very good, I didn't even know it was possible!

Not from stand still. When changing up in to third at a decent pace, Traction is lost and i'm tramping up the road at --mph

btw michelin sport with lot's o tread....

I meant I didn't know it was possible to re-map that ecu like that!

I know about the third gear traction breaking!

[zaust]

Was just a case of look at the value's and have a play.

[Rav335uk]

Is that a standard ecu????
I didn't know you could mess about with it, without dropping another chip into it.

[zaust]

Sorry should have said. It is one of jason's (chipped uk) chip's. But it was fueling like hell in low revs at first. So was removed played with and now all the way.

[Rav335uk]

Mine is doing the same, over fuelling like fook
Changed the afm too, blue temp switch and back on the co readings, high again.

If you don't mind, but how much was it all in, i might be looking to have it done too.

BTW, was it idling like a dog too??????

[zaust]

mine idels a bit lumpy, but thats the map as the values have been moved more to the mid and top end. I can't say how much i paid as it was a one off mates rates price. but it is the best bang for bux i have ever spent speed touches chips have all had good feed back and i know ants chips are good. so you shouldnt have to spend that much. msd will give the best results but 800 is a lot to come up with for a max of 20 hp extra.

[zaust]

Cleaned and then decided to pint the rocker, Catch tank re-located, early coolant bottle re-located to the batt tray, afpr fitted (set@3.4)

Just need to get the nos hooked up and the bbtb in and on and thats it for a while.

[zaust]

Still need's a lot of snagging done and the in-let need's doing.

[Rav335uk]

Loving the "Check light" location.
BTW, what's the silver tank and the 2 hoses going to the inlet rubber for???

[zaust]

Catches moister and excess crap that would otherwies go back into the intake. (from rocker to tb boot)

[zaust]

Had a couple of hour's spare. So I have made a intake for the over kill k&n and added the solinoids for the nos

[ImysE30]

Looking good, should be great fun with the NOS

[gareth]

loving the coil mounting bracket!
could you not use the empty washer bottle mounting stud with one of those plastic nuts to fix the bracket?

[zaust]

It is bolted in but I did not have long enough to move everything. It will be moved to a new point not the water bottle stud(strength not good), and the bracket for the induction will be renewed as I have used a cdl mounting bracket for the mo, Need to make a heat shield for it too.

I have seen a very small washer bottle on the demon tweaks site that will sit i there too.

More next monday

[gareth]

i seem to recall something about E34 washer bottles fitting there.
I've got a Vitara one on the old M20 AFM cracket and that fits quite well.

[zaust]

This one ↓↓↓ will e nice and neat tucked away.

http://www.demon-tweeks.co.uk/products/ ... =MAXMXP127

[Rav335uk]

E34 washer bottle fits a treat, like it was meant to.